Ghionw Posted March 20, 2015 Share Posted March 20, 2015 On that note, are you on coilovers or stock struts. And did you roll the fenders to fit? I am on BC Racing coilovers. No roll or pull. Running about 1.3 deg camber all around (I think). Excuse the cellphone pics, but for reference, here you go. http://legacygt.com/forums/picture.php?albumid=1224&pictureid=9155 http://legacygt.com/forums/picture.php?albumid=1224&pictureid=9154 http://legacygt.com/forums/picture.php?albumid=1224&pictureid=9156 Link to comment Share on other sites More sharing options...
ncfree Posted March 20, 2015 Share Posted March 20, 2015 A few of us on here are 18x9.5 40et. I am personally running 18x9.5 et45 on 245/40/18 on coils. This!!! Thank you!!! Yes they'll fit then. Great. Link to comment Share on other sites More sharing options...
fredrik94087 Posted March 20, 2015 Share Posted March 20, 2015 I am on BC Racing coilovers. No roll or pull. Running about 1.3 deg camber all around (I think). Excuse the cellphone pics, but for reference, here you go. http://legacygt.com/forums/picture.php?albumid=1224&pictureid=9155 http://legacygt.com/forums/picture.php?albumid=1224&pictureid=9154 http://legacygt.com/forums/picture.php?albumid=1224&pictureid=9156 Raijin? "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
GTEASER Posted March 20, 2015 Share Posted March 20, 2015 Yes. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Ghionw Posted March 22, 2015 Share Posted March 22, 2015 What he ^^ said.. Link to comment Share on other sites More sharing options...
Jace2010LGT Posted March 22, 2015 Share Posted March 22, 2015 Looking nice Ghion. Makes me wanna wash mine. Maybe we should do another 5th gen photos shoot. Bring something better than our cell phones. Link to comment Share on other sites More sharing options...
Ghionw Posted March 23, 2015 Share Posted March 23, 2015 Looking nice Ghion. Makes me wanna wash mine. Maybe we should do another 5th gen photos shoot. Bring something better than our cell phones. Sounds good to me. Gotta do me headlight retrofit and painting first though:hide:. I will get a chance to use the new dslr the wife bought me. Link to comment Share on other sites More sharing options...
awddavid Posted March 25, 2015 Share Posted March 25, 2015 Reposting suspension and wheel/tire specs here for 4th gen Outback owners. http://i.imgur.com/OdBHp1h.jpg http://i.imgur.com/Yk26R0X.jpg No issues with rubbing or ground clearance, but I think I can (and will) lower it just a tiny bit more. Tire/fender gap is currently about 3/4". Specs: - KW V3 coilovers - Legacy rear upper control arms - SPL Parts rear lower control arms - '15 STI 20mm rear sway bar - 19x8.5 et 38 Avant Garde M590 on 245/45/19 Toyo Proxes 4 Plus Link to comment Share on other sites More sharing options...
eckseleven Posted March 25, 2015 Share Posted March 25, 2015 ^ wow that looks really good. Link to comment Share on other sites More sharing options...
SubieLove1010 Posted March 25, 2015 Share Posted March 25, 2015 I think im going to go ahead and grab the Tein Street Basic Coil Overs.. Link to comment Share on other sites More sharing options...
fredrik94087 Posted March 25, 2015 Share Posted March 25, 2015 I think im going to go ahead and grab the Tein Street Basic Coil Overs.. Good choice for the $$ "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
SubieLove1010 Posted March 25, 2015 Share Posted March 25, 2015 any recommendations on strut tower bars real quick? Link to comment Share on other sites More sharing options...
s2baru Posted March 25, 2015 Share Posted March 25, 2015 Good choice for the $$ Agreed. I run them and have no complaints. Basically a set it and forget it setup. For daily driving its plenty comfortable still with the springs rates. 7f and 5r I believe Link to comment Share on other sites More sharing options...
brandon.mol Posted March 25, 2015 Share Posted March 25, 2015 any recommendations on strut tower bars real quick? For the front, I have the Whiteline one. Construction and material quality are great and its very solid. Also adjustable length for easy fitment ... However the brackets didn't sit flush without modification, so you may be better off with something else. http://tapatalk.imageshack.com/v2/15/03/25/3709787dd3420ba73d7789d35dfa9ab6.jpg http://tapatalk.imageshack.com/v2/15/03/25/de745c852602065fb4e07c52985b699c.jpg http://tapatalk.imageshack.com/v2/15/03/25/e6c7e03b5a04c4c2124bd86bd9957580.jpg This last one shows where I had to cut off the aluminum tab and file off some of the under side. Link to comment Share on other sites More sharing options...
SubieLove1010 Posted March 25, 2015 Share Posted March 25, 2015 Thanks guys!! s2baru, how many notches are you at on them? Link to comment Share on other sites More sharing options...
s2baru Posted March 25, 2015 Share Posted March 25, 2015 http://i991.photobucket.com/albums/af38/stu-nami/S2BARU/20130723_231940_zpsbnphsg2r.jpghttp://i991.photobucket.com/albums/af38/stu-nami/S2BARU/20130717_214507_zpsddsk10q5.jpg These should be my final settings that I adjusted them at. Top is the front and second pick is the rear of course. Link to comment Share on other sites More sharing options...
SubieLove1010 Posted March 25, 2015 Share Posted March 25, 2015 I don't mean to be a pain, but do you have a side profile shot on those levels? Link to comment Share on other sites More sharing options...
s2baru Posted March 25, 2015 Share Posted March 25, 2015 http://i991.photobucket.com/albums/af38/stu-nami/S2BARU/9889297505_6741763bef_c_zpsq7zrjf5y.jpeg Hopefully this is what you mean. Keep in mind wheels are 255-35-19 Link to comment Share on other sites More sharing options...
DJMajickMan Posted March 25, 2015 Share Posted March 25, 2015 did you have to roll and/or pull for those wheels? Link to comment Share on other sites More sharing options...
Perscitus Posted March 25, 2015 Share Posted March 25, 2015 Far less agressive than s2barus setup, but I think its at or close to the no roll/pull/rub limits with a mild RCE black/Bils combo drop. Might be able to get away with same in +40 or +42 too. 18x8.5 +45 wrapped in 245/45R18 RCE Blacks and Bilstein shocks Link to comment Share on other sites More sharing options...
s2baru Posted March 25, 2015 Share Posted March 25, 2015 did you have to roll and/or pull for those wheels? Fronts yes there is a minor roll and pulled about 1/4inch. Rears there is very minor bondo is the arch and I didn't want to risk popping the paint so I took a grinder and trimmed back the lip just a smidge. Link to comment Share on other sites More sharing options...
Zee199969 Posted March 25, 2015 Share Posted March 25, 2015 (edited) Far less agressive than s2barus setup, but I think its at or close to the no roll/pull/rub limits with a mild RCE black/Bils combo drop. Might be able to get away with same in +40 or +42 too. 18x8.5 +45 wrapped in 245/45R18 RCE Blacks and Bilstein shocks Looks great perscitus! I was thinking about this exact same wheel/tire setup. So thus far, you have not noticed any rub with the drop the RCE blacks give? Edited March 25, 2015 by Zee199969 My "Build" Link to comment Share on other sites More sharing options...
faded-a-fool Posted March 26, 2015 Share Posted March 26, 2015 (edited) If it helps, here's mine. RCE blacks/Bils. 19x8.5 +38 with 245/40 rubber. No rubbing. Might even go 245/45 when I get new tires. Hopefully I still won't get any rubbage. http://tapatalk.imageshack.com/v2/15/03/25/1a362870ebb9f26806ce010c6c091817.jpg Edited March 26, 2015 by faded-a-fool Link to comment Share on other sites More sharing options...
marcin93 Posted March 26, 2015 Share Posted March 26, 2015 Noob to suspension concepts here but from what I read in this forum buying springs to lower my car is a BAD idea on stock struts....So basically the most efficient way (on my pocket) is to simply grab some coils (say tein's) and call it a day? Link to comment Share on other sites More sharing options...
fredrik94087 Posted March 26, 2015 Share Posted March 26, 2015 Noob to suspension concepts here but from what I read in this forum buying springs to lower my car is a BAD idea on stock struts....So basically the most efficient way (on my pocket) is to simply grab some coils (say tein's) and call it a day? Yes. "It's within spec" - SOA "Depth is only shallowness viewed from the side." - Fredism "So, how much did it cost for your car to be undriveable ." - Stephen (very close friend) "You have done so much it would be stupid to go back." - Sunny of Guru Electronics 2018Q50RS | 2015WrxThread | Shrek Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now