camjuppe Posted June 18, 2018 Share Posted June 18, 2018 Can somebody please give me a rundown of the complete parts list? 4 legacy struts and 2 rear bump stops should be enough? Link to comment Share on other sites More sharing options...
bdcvg Posted June 20, 2018 Share Posted June 20, 2018 Can somebody please give me a rundown of the complete parts list? 4 legacy struts and 2 rear bump stops should be enough? You need the Legacy Rear Upper control arms and Whiteline camber bushings or Megan racing Rear upper control arms. Link to comment Share on other sites More sharing options...
Abductee Posted September 30, 2018 Share Posted September 30, 2018 And my first post will be a thank you. This answered my questions. Link to comment Share on other sites More sharing options...
lakestreet Posted October 19, 2018 Share Posted October 19, 2018 you can just cut the bump stops too if you wanted to, I did that. Link to comment Share on other sites More sharing options...
kaitanium Posted June 19, 2019 Share Posted June 19, 2019 has anyone who has done this mod taken out all the subframe spacers? Link to comment Share on other sites More sharing options...
connoisseurr Posted December 10, 2021 Share Posted December 10, 2021 Reviving this dead thread as I'm on a mission for getting a stock-ish height Legacy setup into my OBXT. I've read many times in this thread "Bilsteins" have a higher spring perch and would like to know if this also applies to the B6 or B8 Bilstein struts available in the US (looks like Bilstein uses the same P/N for Legacy GT and Spec.b fitments; and also calls out the usage of needing Spec.b spring perches). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now