JustCallMeNick Posted November 4, 2016 Share Posted November 4, 2016 I have a set of Hella 500 Fog lights and a set of Hella 500 Driving lights. It's up to me to wire them up to my 2009 Legacy. I want the lights to go off when the car goes off, but otherwise I want both sets of Hellas to switch on/off independently of anything else (so two toggle switches). I do have the manual. Thoughts? Link to comment Share on other sites More sharing options...
fedaykin Posted November 4, 2016 Share Posted November 4, 2016 Wire the lights up (via relays) directly to battery and find a wire that becomes active when the car is on/running and use that as the trigger wire for the relays (via your switches). Don't forget fuses! Link to comment Share on other sites More sharing options...
ehsnils Posted November 6, 2016 Share Posted November 6, 2016 I'd wire the driving lights to the main beams via a switch and the fog lights to the position lights via a switch. And of course use relays to avoid voltage drops. In order to make the fogs a bit smarter I'd wire the relay for the fog lights to turn off when the low beams goes on, but that's optional. Link to comment Share on other sites More sharing options...
JustCallMeNick Posted November 11, 2016 Author Share Posted November 11, 2016 I kind of want to have full control over both of them with two toggle switches (one for hella fogs, one for hella driving lights). Link to comment Share on other sites More sharing options...
Silinc3r Posted November 11, 2016 Share Posted November 11, 2016 I got you man haha just watch my videos Silinc3r's 05 SWP GT/Spec B Link to comment Share on other sites More sharing options...
Silinc3r Posted November 11, 2016 Share Posted November 11, 2016 Let me know if you have any other questions after watching the videos!! Silinc3r's 05 SWP GT/Spec B Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.