FrozenNorthLGT Posted January 8, 2009 Share Posted January 8, 2009 Does anyone know the numbers for the little flaps in front of the rear wheels on an 05 LGT sedan. Mine is missing the drivers side and I removed and saved the pass side cause the asymmetry was driving me nuts. Now I want to fix both correctly. Going through some part number sheets I found I come up with 96054AG03A End Cover S:sd Lh 909130067Clip Does this "end cover" come with the lower flap piece (looks like a splace guard for the front of the wheel)? Im not talking about the lower flap that folds, just to clarify. Also, one other thing, is 909130051 the correct number for the screw type pop-its for the engine cover, and the air box intake? because I need to order a handful of them too and they look the same as the ones for the little wheel flaps, but seem to have a different part number. Thanks all in advance. Link to comment Share on other sites More sharing options...
PeterJMC Posted January 8, 2009 Share Posted January 8, 2009 Looks you are right, 96054AG03A(left), 96054AG02A(right). See item #5 and #7. http://opposedforces.com/parts/legacy/us_b13/type_8/body_equipment_exterior/spoiler/illustration_2/ Engine Cover Clip, 909130051 http://opposedforces.com/parts/legacy/us_b13/type_8/engine/cover_engine/ Link to comment Share on other sites More sharing options...
FrozenNorthLGT Posted January 8, 2009 Author Share Posted January 8, 2009 Sweet, thanks for the illustrations. Cant tell from that though if the xx0067 number is the number for the three clips that hold the end cover on, or does anyone know if that part comes with the mounting clips. Link to comment Share on other sites More sharing options...
super.duper.BL6 Posted January 8, 2009 Share Posted January 8, 2009 End cover does not come with clips. You need to order the clips separately. Link to comment Share on other sites More sharing options...
PeterJMC Posted January 8, 2009 Share Posted January 8, 2009 Sweet, thanks for the illustrations. Cant tell from that though if the xx0067 number is the number for the three clips that hold the end cover on, or does anyone know if that part comes with the mounting clips. Your best bet is to PM KINGOFPARTS (Jeremy) and get some first hand information from him. He's very repsonsive to PMs. Link to comment Share on other sites More sharing options...
FrozenNorthLGT Posted January 8, 2009 Author Share Posted January 8, 2009 If i need anything else that no one knows I will do that, but before I do, has anyone ordered the end cover before....is it just the verticle "mud flap/diffuser" piece or does it come attached to the piece that mounts to the car? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.