whitrzac Posted April 14, 2015 Share Posted April 14, 2015 I have a Invidia catless downpipe for the 5eat. I've put both the cheap fleebay exhaust on, and now the SPT v1 on. The fleebay had ~1/4in gap at the top of the flange from the downpipe to the midpipe. At the time I thought it was just the cheap fleebay parts and got the torch out. I put the SPT system on today and there wasn't as large of a gap, but it was at least 1/8in+ in the same spot. Has anyone else had issues with invidia downpipes? Link to comment Share on other sites More sharing options...
ras06LGT Posted April 15, 2015 Share Posted April 15, 2015 I have the Invidia catless DP for 5MT installed with no fitment issues. In fact, it's much better than the CNT pipe I removed. Link to comment Share on other sites More sharing options...
mbazzano88 Posted April 17, 2015 Share Posted April 17, 2015 I'm currently sitting at a shop to get an exhaust leak looked at. He brought me in and showed me my Invidia catless dp for 5mt that is nearly severed completely in two by a crack in the top weld. I've had the pipe on there for just about three years. Maybe consider a higher quality pipe. Link to comment Share on other sites More sharing options...
I Donated Too laff79 Posted April 17, 2015 I Donated Too Share Posted April 17, 2015 ^it's not the pipe bro. You borked your car Link to comment Share on other sites More sharing options...
whitrzac Posted April 18, 2015 Author Share Posted April 18, 2015 ^it's not the pipe bro. You borked your car With the way mine fits, it's entirely possible... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.