funnyman06 Posted July 15, 2018 Share Posted July 15, 2018 Ive been digging and can not find the answer im looking for. I ordered FHI 4 pot / 2 Pots for the outback along with KNS brackets. However im stugging to determine which rear rotors I need. The outback rears are larger in DIA than the 06 wrx so I find it hard to believe thats what I would need, but the 06 WRX use a skinnier parking brake. Let me know what you guys think? Also ordered stainless lines, and master cylinder brace. I'm done with poor subaru brakes, my Focus ST felt like it would pick the ass end up when you stomped on them. Link to comment Share on other sites More sharing options...
utc_pyro Posted July 15, 2018 Share Posted July 15, 2018 Use the Legacy GT size rears. I have STI brembos up front and 2-pots in the rear, and the rear used the stock rotor size. Link to comment Share on other sites More sharing options...
funnyman06 Posted July 15, 2018 Author Share Posted July 15, 2018 Wonderful, thank you for the quick reply! Just to confirm you have the red/black 2 pots off an 05 06 WRX and not the gold 2 pot brembos correct? Link to comment Share on other sites More sharing options...
utc_pyro Posted July 15, 2018 Share Posted July 15, 2018 Wonderful, thank you for the quick reply! Just to confirm you have the red/black 2 pots off an 05 06 WRX and not the gold 2 pot brembos correct? Yep, or well mine were raw aluminum because they were remanufactured ones. At pome point before I saw they they were red or black. They actually provide more breaking torque than the rear brembos. Link to comment Share on other sites More sharing options...
funnyman06 Posted July 15, 2018 Author Share Posted July 15, 2018 awesome thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.