Hanger Posted December 16, 2017 Share Posted December 16, 2017 ○ ○ ○ Instagram: itshangertime :spin: ○ ○ ○ Link to comment Share on other sites More sharing options...
BDII Posted December 16, 2017 Share Posted December 16, 2017 Saw a 5th gen 3.6 with an exhaust today. Quad tip. Pretty impressed with the sound. Need forum help? Private Message legGTLT Link to comment Share on other sites More sharing options...
Humble Rumble Posted December 16, 2017 Share Posted December 16, 2017 Saw a 5th gen 3.6 with an exhaust today. Quad tip. Pretty impressed with the sound. A 3.6 with a nice exhaust is a beautiful thing to hear. Here's mine with a Nameless ABE. https://www.instagram.com/p/BZ_wzk-Dsyu/ 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
LegitLegacy Posted December 18, 2017 Share Posted December 18, 2017 2013 3.6R with Invidia N1 Link to comment Share on other sites More sharing options...
TDWPgtp Posted December 27, 2017 Share Posted December 27, 2017 So I just stumbled across this exhaust. I can't seem anyone but the manufacturer that sells it for our cars. I really like this sound, and would love to find something that sounds similar, or find a cheaper place to buy this one. Does anyone have any other experience with this exhaust or something that sounds similar? Link to comment Share on other sites More sharing options...
GTEASER Posted December 27, 2017 Share Posted December 27, 2017 Rally Sport Direct sells X-Force GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Milkywitness Posted March 7, 2018 Share Posted March 7, 2018 Hey guys I do you know if a 2015 2.5i nameless axleback muffler delete exhaust will fit in a 2010 2.5i legacy? Link to comment Share on other sites More sharing options...
LegacyOBS Posted April 24, 2018 Share Posted April 24, 2018 I have Invida Q300 dual for the 2.5i. Actually trying to sell the set from intermediate pipe and the two mufflers. They are direct fit for my 2.5i (but not sure why the 2013 Legacy did not have the extra bumper cover on the right hand side). It pretty loud around 2500+ rpm. Like it much but if you have a baby sitting in the back, you will tell the difference between a crying baby and the sound of muffler. Link to comment Share on other sites More sharing options...
linksusmaximus Posted May 15, 2018 Share Posted May 15, 2018 (edited) I FINALLY posted my Exhaust video to YouTube. I never knew how easy it was.. Anyway, here is the info: 2013 Subaru Legacy 2.5i 6MT w/ Dual Nameless 5-in Axleback Exhaust (Sorry for the shaky camera.. wanted quick and dirty) Midpipe is from a 2012 Legacy GT. Exhaust hangers were welded on the passenger side and bumper cutout removed to be able to install the dual Nameless Performance Axlebacks. [ame=http://www.youtube.com/watch?v=VeNtsfOy7Uw]2013 Subaru Legacy 2 5i 6MT w/ Dual Nameless 5-in Axleback Exhaust - YouTube[/ame] Edited May 16, 2018 by Zee199969 Link to comment Share on other sites More sharing options...
NateSubzLGT Posted August 11, 2018 Share Posted August 11, 2018 I got a Borla cat-back on mine.. Link to comment Share on other sites More sharing options...
linksusmaximus Posted September 6, 2018 Share Posted September 6, 2018 Anybody live in or near the Flagstaff, AZ area willing to help a local shop mock up a custom midpipe (Nameless refab) on their 5th gen? Would comp. PM me! Link to comment Share on other sites More sharing options...
GTEASER Posted September 6, 2018 Share Posted September 6, 2018 Anybody live in or near the Flagstaff, AZ area willing to help a local shop mock up a custom midpipe (Nameless refab) on their 5th gen? Would comp. PM me!I think Sarang is the closest but IIRC he is in the Phoenix area. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
linksusmaximus Posted September 6, 2018 Share Posted September 6, 2018 I think Sarang is the closest but IIRC he is in the Phoenix area. And that's uncomfortably far.. thanks. Link to comment Share on other sites More sharing options...
Sarang Posted September 6, 2018 Share Posted September 6, 2018 Would borrowing the stock mid pipe help? I don't get up there for work anymore, but I'd be happy to let you borrow the stock one if you get down here now and then. Link to comment Share on other sites More sharing options...
linksusmaximus Posted September 6, 2018 Share Posted September 6, 2018 Would borrowing the stock mid pipe help? I don't get up there for work anymore, but I'd be happy to let you borrow the stock one if you get down here now and then. I really appreciate that Sarang, but unfortunately i'm never over there. Currently on the east coast. My goal is probably quite a stretch - I want to go full catback and match the Nameless axlebacks I have now with a Nameless midpipe to avoid a frankenstein setup. I found someone willing to fab a midpipe modeled off the discontinued 5th gen Nameless midpipe (apparently they can get the fab prints from Nameless), but he also needs to mock it up.. I assume for quality control purposes? Unless he's BS'ing me. Link to comment Share on other sites More sharing options...
ripstik Posted September 10, 2018 Share Posted September 10, 2018 I really appreciate that Sarang, but unfortunately i'm never over there. Currently on the east coast. My goal is probably quite a stretch - I want to go full catback and match the Nameless axlebacks I have now with a Nameless midpipe to avoid a frankenstein setup. I found someone willing to fab a midpipe modeled off the discontinued 5th gen Nameless midpipe (apparently they can get the fab prints from Nameless), but he also needs to mock it up.. I assume for quality control purposes? Unless he's BS'ing me. i have a stock midpipe sitting in the rafters of my garage in VT if that's close enough to make it worth it for you. Link to comment Share on other sites More sharing options...
linksusmaximus Posted September 10, 2018 Share Posted September 10, 2018 i have a stock midpipe sitting in the rafters of my garage in VT if that's close enough to make it worth it for you. Thank you, but I still wouldn't be able to get it to AZ. At that point I don't think the benefit outweighs the cost.. Link to comment Share on other sites More sharing options...
sanhozay Posted September 12, 2018 Share Posted September 12, 2018 Heya guys, first post in a while. Its been about 3,000 miles since I installed a Nameless Axelback with the 5" muffler on my 2014 2.5i w/ CVT. I have to say I am nothing but satisfied with this thing. This minor $300 upgrade makes a MAJOR difference in actually giving my FB25 a proper rumble. Its louder than my neighbors stock 2015 WRX lol. The drone from the CVT is not too bad, still there, but I use my paddle shifters about 90% of the time anyways so it kinda helps it sound better. Sound Clip:https://www.youtube.com/watch?v=SlwAd8KWuzA Link to comment Share on other sites More sharing options...
14Legacy-Sport Posted October 9, 2018 Share Posted October 9, 2018 I also have a Nameless axleback installed on my 2014 2.5 Legacy. Enjoy! Link to comment Share on other sites More sharing options...
ssulb Posted October 10, 2018 Share Posted October 10, 2018 (edited) I tried the Nameless 5" Axle back mufflers first. They sounded pretty good and sometimes heard little growls. wide open throttle timestamp: 5:05 Then I switched to a NVIDIA N1 cat back exhaust. Sounds great with some discrete pops. wide open throttle timestamp: 5:25 and 6:30 Sadly, there is a lot of drone near highway RPMs with these two setups, which sucks on my long drive to school. Edited October 10, 2018 by ssulb Link to comment Share on other sites More sharing options...
Hanger Posted April 5, 2019 Share Posted April 5, 2019 Finally shot a sound clip for my setup Car:2013 Subaru 2.5i w/ FB25 Setup: 2010-2014 STi Sedan Stock Catback Muffler: Megan Racing Dual Mufflers for 08-14 WRX/STi Will shoot more videos another day. 1 year later I finally got the sound clip ○ ○ ○ Instagram: itshangertime :spin: ○ ○ ○ Link to comment Share on other sites More sharing options...
shububu Posted June 21, 2019 Share Posted June 21, 2019 Had an HSK Silent Hi-Power but it was just a bit too loud for 5am starts. Even had a Vibrant performance resonator welded in but decided to go with nameless mid and y with stock mufflers Link to comment Share on other sites More sharing options...
13Legacy01 Posted June 21, 2019 Share Posted June 21, 2019 Had an HSK Silent Hi-Power but it was just a bit too loud for 5am starts. Even had a Vibrant performance resonator welded in but decided to go with nameless mid and y with stock mufflers Do you have a sound clip? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
shububu Posted June 24, 2019 Share Posted June 24, 2019 Do you have a sound clip? Sent from my iPhone using Tapatalk No, no sound clip but it does sound good and the Vibrant resonator toned it down a bit but not enough. Its for sale btw. In great condition, was only on the car for a year. PM me if interested Link to comment Share on other sites More sharing options...
abakja1 Posted May 17, 2020 Share Posted May 17, 2020 I just swapped out my Invidia Q300 and put in a new invidia N1 dual muffler catback. I like the N1 better for the sound and drive experience. It is louder, but not too obnoxious as I have a catted invidia Jpipe up front Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now