abaig97 Posted March 23, 2016 Share Posted March 23, 2016 http://uploads.tapatalk-cdn.com/20160323/77787fd77ed9820b8970e35c5be7422b.jpg just installed the jdm vents in my bumper, it took a lot of cutting and trimming of both, the vent and the bumper, its not perfect but it can happen, but will require a lot of work Sent from my STV100-1 using Tapatalk Link to comment Share on other sites More sharing options...
MJC784 Posted March 29, 2016 Share Posted March 29, 2016 http://uploads.tapatalk-cdn.com/20160323/77787fd77ed9820b8970e35c5be7422b.jpg just installed the jdm vents in my bumper, it took a lot of cutting and trimming of both, the vent and the bumper, its not perfect but it can happen, but will require a lot of work Sent from my STV100-1 using Tapatalk How much did those Jdm vents run you Link to comment Share on other sites More sharing options...
abaig97 Posted March 29, 2016 Share Posted March 29, 2016 I paid 30$ for them from a dealer in UAE, im from there so I go back often Sent from my STV100-1 using Tapatalk Link to comment Share on other sites More sharing options...
abaig97 Posted March 29, 2016 Share Posted March 29, 2016 How much did those Jdm vents run you 30$ from a dealer in UAE, Im from there, so I go back often Sent from my STV100-1 using Tapatalk Link to comment Share on other sites More sharing options...
MJC784 Posted March 30, 2016 Share Posted March 30, 2016 30$ from a dealer in UAE, Im from there, so I go back often Sent from my STV100-1 using Tapatalk Oh nice. When's the next time you're going haha. Mind picking me up a set Link to comment Share on other sites More sharing options...
abaig97 Posted April 2, 2016 Share Posted April 2, 2016 Oh nice. When's the next time you're going haha. Mind picking me up a set im going back over summer, I will be making a post asking if anyone wants them, as I can bring a lot over, I return end of august Sent from my STV100-1 using Tapatalk Link to comment Share on other sites More sharing options...
gonzoman10 Posted April 3, 2016 Share Posted April 3, 2016 I should ask him to make them look EXACTLY like the JDM ones? Actually, it does look amazing. Just wondering if anyone had any ideas to make them different. Like, only 3 parts separating instead of 4. Maybe that will be too complicating though... looks good as-is i guess...JDM ones...(NOT my USDM ones im trying to get made) http://i191.photobucket.com/albums/z314/imprezsing04/Exhaust_K2Gear3.jpg http://i191.photobucket.com/albums/z314/imprezsing04/Nyomi_029.jpg http://i191.photobucket.com/albums/z314/imprezsing04/DSC00746.jpg Dat car booty Sent from my LGLS991 using Tapatalk Link to comment Share on other sites More sharing options...
fewxdavid Posted April 9, 2016 Share Posted April 9, 2016 Those vents are ******* sick, I WANT THEM NOW!!!! Sent from my SM-N920T using Tapatalk Link to comment Share on other sites More sharing options...
Imprezsing04 Posted May 9, 2016 Author Share Posted May 9, 2016 (edited) http://uploads.tapatalk-cdn.com/20160323/77787fd77ed9820b8970e35c5be7422b.jpg just installed the jdm vents in my bumper, it took a lot of cutting and trimming of both, the vent and the bumper, its not perfect but it can happen, but will require a lot of work Sent from my STV100-1 using Tapatalk abaig97, That looks great and essentially what I hope to replicate. But, for those wondering, my post 197 shows the USDM opening with the USDM reflector vent removed. As you can see, it is bumper behind there with holes for the USDM reflector to screw into. abaig97 had to cut the JDM vent AND dremel the opening of his USDM openings to make the vent fit. My attempt is to make a completely plug and play vent. Unscrew USDM reflector, screw in JDM replica vent without having to modify anything so that it can be easily converted back to stock if necessary. You CAN hack up your rear bumper but you will no longer be able to put the reflector back on. And an update, I just sent out today: the vents to get scanned. I am hoping to make big progress in the next few months. My engine just blew so hopefully you guys will allow me to make like $5 profit off each of these...anything would help my engine build lol Thanks everyone for your continued support and patience. Oh, and I have to look into a vendor account because I see abaig97's thread got closed for being an un-authorized GB. -Scott Edited May 9, 2016 by Imprezsing04 Link to comment Share on other sites More sharing options...
KeemsEZ30USDM Posted May 14, 2016 Share Posted May 14, 2016 Count me in, if this project is still going ahead! put me on the list for the group buy! ill pay $60 a/set if need be...still down, want these!! Link to comment Share on other sites More sharing options...
abaig97 Posted May 18, 2016 Share Posted May 18, 2016 abaig97, That looks great and essentially what I hope to replicate. But, for those wondering, my post 197 shows the USDM opening with the USDM reflector vent removed. As you can see, it is bumper behind there with holes for the USDM reflector to screw into. abaig97 had to cut the JDM vent AND dremel the opening of his USDM openings to make the vent fit. My attempt is to make a completely plug and play vent. Unscrew USDM reflector, screw in JDM replica vent without having to modify anything so that it can be easily converted back to stock if necessary. You CAN hack up your rear bumper but you will no longer be able to put the reflector back on. And an update, I just sent out today: the vents to get scanned. I am hoping to make big progress in the next few months. My engine just blew so hopefully you guys will allow me to make like $5 profit off each of these...anything would help my engine build lol Thanks everyone for your continued support and patience. Oh, and I have to look into a vendor account because I see abaig97's thread got closed for being an un-authorized GB. -Scott yea my post got closed, I didnt know it had to be authorized, but everyone who wanted one off that post had contacted me and got sorted out thankfully Sent from my STV100-1 using Tapatalk Link to comment Share on other sites More sharing options...
cryo Posted November 28, 2016 Share Posted November 28, 2016 Any updates? Dave [sIGPIC][/sIGPIC] Providing unmatched customer service and a Premium level of Dyno/E-tuning to the Community cryotuneperformance@yahoo.com facebook.com/cryotuneperformance. Link to comment Share on other sites More sharing options...
Imprezsing04 Posted November 30, 2016 Author Share Posted November 30, 2016 Any updates? Dave Another member currently has the JDM vent in his possession to 3D scan it. I will follow up with him to see how he is doing. Thanks and happy holidays everyone! Link to comment Share on other sites More sharing options...
dug-e-fresh Posted April 26, 2017 Share Posted April 26, 2017 I'd love a set of these... heck if someone could just point me to where to get the jdm ones, I'll just cut to fit. I couldn't find them on japanparts... might have overlooked them. Any help would be greatly appreciated Link to comment Share on other sites More sharing options...
amp583 Posted April 27, 2017 Share Posted April 27, 2017 Any updates on this? Want to get this in before I sell. Link to comment Share on other sites More sharing options...
ethanrbutler Posted August 17, 2017 Share Posted August 17, 2017 I'm definitely interested Link to comment Share on other sites More sharing options...
skuubi Posted August 23, 2017 Share Posted August 23, 2017 I'm interested if this is still happening! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Toominator Posted September 12, 2017 Share Posted September 12, 2017 Did these ever get made? Any updates Link to comment Share on other sites More sharing options...
Imprezsing04 Posted October 1, 2017 Author Share Posted October 1, 2017 Did these ever get made? Any updates Not yet but see attached. I need to start from scratch since my 3D scan was a part file so I could not modify it and edit it to make it USDM specific. I hope to get a good prototype together before the end of the year. And the second photo is a comparison of a JDM cut up into a USDM opening versus a JDM vent in a JDM bumper. I am trying to make a new one to fit the USDM opening and fit like OEM Link to comment Share on other sites More sharing options...
ilikefunkymusic Posted October 1, 2017 Share Posted October 1, 2017 Mark me as interested in a set Link to comment Share on other sites More sharing options...
amp583 Posted October 1, 2017 Share Posted October 1, 2017 I’m in for a set too. Link to comment Share on other sites More sharing options...
JT1657616149 Posted January 17, 2021 Share Posted January 17, 2021 bump Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now