Humble Rumble Posted October 20, 2016 Share Posted October 20, 2016 Copying this here for links. 3M Di-Noc carbon fiber vinyl wrap here. Xuji Steering Wheel Wrap here. Xuji Shifter Wrap here. Not Shown: Soundbot SB360 Bluetooth here. I've been using it for a year so far and still works great. Clips to that magnet piece in the change holder. Run the cable through the cup dividers and it plugs into your center console 12V and Aux input. Never any gripes with it really. Works better than the Bluetooth did in my old Ford Focus. $20 well spent. http://i.imgur.com/qrk3AXu.jpghttp://i.imgur.com/Pf0AoYo.jpg 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Timothy.B Posted October 31, 2016 Share Posted October 31, 2016 (edited) *CHEAPER* Steering Wrap Link I apparently done goof'd. I saw the initial price on DHGate but didn't see the shipping cost. The above link is where you want to order from. Free shipping. You have a few choices of thread color as well. I also bought the shifter one on Aliexpress.com but for some reason there's a few extra options for thread color on the DHGate so I'll just leave that one up. They're the same price. In case someone wants to match the two together. white thread/white thread, etc. etc. Edited October 31, 2016 by Timothy.B Timothy.B's 2011 LEGACY 3.6R Link to comment Share on other sites More sharing options...
blklgt05 Posted December 16, 2016 Share Posted December 16, 2016 DIY Bucket Seats http://legacygt.com/forums/showthread.php/diy-bucket-seats-258543.html?p=5542612#post5542612 http://i154.photobucket.com/albums/s253/blklgt05/th_59D81536-8889-4D87-BCDD-DDAC4CE74517_zps16gkzuse.jpg mod journal Link to comment Share on other sites More sharing options...
GTEASER Posted June 13, 2017 Share Posted June 13, 2017 (edited) It is confirmed...2015+ WRX seats DO NOT bolt into the 5th Gen Legacy. More info to follow.... Edited June 13, 2017 by GTEASER GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
GTEASER Posted June 13, 2017 Share Posted June 13, 2017 (edited) Swapping rails won't work either. The WRX seats are bolted to the rails, our seats are riveted. I plan on swapping the cushions/covers. Edited June 13, 2017 by GTEASER GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Peacesells Posted June 13, 2017 Share Posted June 13, 2017 Swapping rails won't work either. The WRX seats are bolted to the rails, our seats are riveted. I plan on swapping the cushions/covers. There's gotta be a way to just swap out the rails. Swaping the cushions ? Haven't heard of that Sent from my SM-G935V using Tapatalk Link to comment Share on other sites More sharing options...
Peacesells Posted June 13, 2017 Share Posted June 13, 2017 My theory was to remove the 4 bolts that hold the rails then put the legacy ones on Sent from my SM-G935V using Tapatalk Link to comment Share on other sites More sharing options...
Peacesells Posted June 13, 2017 Share Posted June 13, 2017 My theory was to remove the 4 bolts that hold the rails then put the legacy ones on Sent from my SM-G935V using Tapatalk Then just attach it to the after market seat base ? Sent from my SM-G935V using Tapatalk Link to comment Share on other sites More sharing options...
GTEASER Posted June 13, 2017 Share Posted June 13, 2017 (edited) Then just attach it to the after market seat base ? Sent from my SM-G935V using Tapatalk Dude! That's brilliant! I will have to see if sliders would be required or if they are on the seat part that bolts onto the OEM base. Edited June 13, 2017 by GTEASER GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
cww516 Posted June 13, 2017 Share Posted June 13, 2017 Did you check both sides already, or just the one? That's basically what I ran into putting bugeye seats into my Baja- the driver's side dropped right in (had to remove the locating bolt, but the mounting points lined up fine), but I swapped the Baja passenger seat slide assembly onto the bugeye seat frame. I only had to do that because the bugeye seats sit about an inch higher than the Baja seats, but it was just 4 bolts and one screw, I think. May have been a little more or less, but I tore things apart to do some cleaning and light stitchwork, so I did more there than just drop the rails. Link to comment Share on other sites More sharing options...
GTEASER Posted June 13, 2017 Share Posted June 13, 2017 I plan to check the drivers side tonight. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Peacesells Posted June 13, 2017 Share Posted June 13, 2017 Dude! That's brilliant! I will have to see if sliders would be required or if they are on the seat part that bolts onto the OEM base. Pretty sure you'd need sliders. By the looks of it the seat would bolt right to the after market seat mount. Youd need sliders to move it front and back Sent from my SM-G935V using Tapatalk Link to comment Share on other sites More sharing options...
GTEASER Posted June 14, 2017 Share Posted June 14, 2017 Any knob made for the Subaru 6MT will work. It is a M12x1.25 thread. If you go with a generic M12x1.25 thread shifter, it will sit up higher because it won't have the recessed area for the reverse lockout. Unscrew, screw on new one. Grimmspeed Cobb Raceseng WC Latheworks and there are many others. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Peacesells Posted August 9, 2017 Share Posted August 9, 2017 Got 90% done with these Sent from my SM-G935V using Tapatalk Link to comment Share on other sites More sharing options...
JohariAhmad Posted October 13, 2017 Share Posted October 13, 2017 (edited) Has anyone bought this from AliExpress: 10.4" Vertical Huge Screen 1024*768 Android Car DVD GPS Navigation Radio Player for Subaru Legacy Outback 2010-2014 Quad Core http://s.aliexpress.com/JJzeEnMR If there is... some feedback & review is really great... Cheers Johari Sent from my SM-G930F using Tapatalk Edited October 14, 2017 by JohariAhmad Paragraph & spacing Link to comment Share on other sites More sharing options...
Zee199969 Posted June 9, 2020 Share Posted June 9, 2020 Prova Convex Wide-Angle Room Mirror in USDM Legacy BM/BR Thanks Humble Rumble! https://legacygt.com/forums/showthread.php/prova-convex-wide-angle-room-mirror-usdm-legacy-bm-br-283014.html My "Build" Link to comment Share on other sites More sharing options...
Recommended Posts