magnusonsubie Posted November 5, 2015 Share Posted November 5, 2015 Far right with white Hellas is a Hawkeye impreza. The center of their hood is always a dead giveaway. For my car I just drove it around a bit today and bought a GS tmic off another member. Probably going to install along with the grimmspeed intake and get retuned from cryo. That probably won't happen till January though. I have way too much school work that keeps adding up this semester. 2005 Vader Wagon Material Tests on Ringland Failure Piston I should have held off and purchased a wagon instead of the spec.B Link to comment Share on other sites More sharing options...
legacy360 Posted November 5, 2015 Share Posted November 5, 2015 I hauled my wagon, which is currently filled with all of its stock parts since my new house has no place for them. http://i.imgur.com/putzg4Eh.jpg Sooo did they end up getting your wagon fixed? Link to comment Share on other sites More sharing options...
alex0856 Posted November 5, 2015 Share Posted November 5, 2015 Almost! The motor is pulled, more parts were bought, and the new ETA is 1 to 1-1/2 weeks. I'm gonna say Monday after next to be safe. Lol, that's HMS (Horizontal Motorsports), a local subie shop. It does so happen to have a U-Haul shop right next door. The last time i has my wagon in for repairs, i felt kinda dumb cause it was by far the least modified car on-site. I've since got TS parts and BBS wheels though, so i feel better. I often feel unwelcome there in the swarm of STi bros. Link to comment Share on other sites More sharing options...
Chris GTO TT Posted November 5, 2015 Share Posted November 5, 2015 Almost! The motor is pulled, more parts were bought, and the new ETA is 1 to 1-1/2 weeks. I'm gonna say Monday after next to be safe. I often feel unwelcome there in the swarm of STi bros. Weird around here I either have people who have no clue or people who think the spec.B and wagon are awesome! 2003 Baja 5MT 2016 Outback 2.5i Premium w/Eyesight Link to comment Share on other sites More sharing options...
BoozeRS05 Posted November 20, 2015 Share Posted November 20, 2015 Well my wagon was tasked to haul two wicker chairs, and could not fit one. Scratched the shit out of my rear bumper too. EB's Subaru journal - 2005 LegacyGT Wagon & 2014 Forester FB25 (2008 specB - RIP) IG@legacygtliving Link to comment Share on other sites More sharing options...
stanjk3 Posted November 22, 2015 Share Posted November 22, 2015 Hauled my set of 16" WRX wheels so I can put them on my girlfriend's Saabaru. Friends don't let friends drink cheap beer. Link to comment Share on other sites More sharing options...
alex0856 Posted November 23, 2015 Share Posted November 23, 2015 Did you mean to say '16 WRX wheels? If so, post pics please! I want someone to put '16 STi wheels on a 4th gen. I think it'd be super sexy. Link to comment Share on other sites More sharing options...
Gex Posted November 23, 2015 Share Posted November 23, 2015 16"=16 inch. 2016 wrx is 5x114. Saabarus are 5x100 fancyish wrx clone. Link to comment Share on other sites More sharing options...
Chris GTO TT Posted December 6, 2015 Share Posted December 6, 2015 On the wagon? http://i1375.photobucket.com/albums/ag459/christobal65/Legacy%20Stuff/IMG_20151205_141350_zpsgnnnndag.jpg 2003 Baja 5MT 2016 Outback 2.5i Premium w/Eyesight Link to comment Share on other sites More sharing options...
alex0856 Posted December 6, 2015 Share Posted December 6, 2015 16"=16 inch. 2016 wrx is 5x114. Saabarus are 5x100 fancyish wrx clone. I am aware of these facts. It seemed off to me that someone would be putting 16s on a Saabaru but what do I know. And I asked in hopes of getting pics of '16 WRX wheels installed on said Saabaru. Link to comment Share on other sites More sharing options...
seanyb505 Posted March 16, 2016 Share Posted March 16, 2016 No pics, I hauled an engine hoist in the wagon. I'm borrowing it from a WRX guy, he asked if we would need to take it apart to get it to fit. HA! Still 98% stock visually. Link to comment Share on other sites More sharing options...
legacy360 Posted April 28, 2016 Share Posted April 28, 2016 New front and rear bumpers loaded to drop off for paint tomorrow morning. Gotta love having a wagon http://uploads.tapatalk-cdn.com/20160428/98877c81153323c3be64fb05b63686a7.jpg http://uploads.tapatalk-cdn.com/20160428/816c97ff1d7f6bf1f200bc5adcaac218.jpg Link to comment Share on other sites More sharing options...
BoozeRS05 Posted December 17, 2017 Share Posted December 17, 2017 Bump! About 260sqft of attic insulation, fit like a glove. Planned to strap another one to the roof rack, but chickened out. EB's Subaru journal - 2005 LegacyGT Wagon & 2014 Forester FB25 (2008 specB - RIP) IG@legacygtliving Link to comment Share on other sites More sharing options...
John J Posted December 18, 2017 Share Posted December 18, 2017 I wish I would have taken pictures. I visited derp to purchase his wagon rear hatch and bumper parts but because mine had been rear-ended my hatch wouldn't open and the damn thing was about a half inch too big to go in the back doors, but after reclining the front seats and moving all the way back, we did wiggle it in through the front passenger door. Then I let the body shop deal with it. Link to comment Share on other sites More sharing options...
Turkeylord Posted June 23, 2018 Author Share Posted June 23, 2018 Link to comment Share on other sites More sharing options...
xt2005bonbon Posted June 23, 2018 Share Posted June 23, 2018 Man I miss mixing ... I need to get back into. Link to comment Share on other sites More sharing options...
amason Posted July 31, 2018 Share Posted July 31, 2018 1700 lbs. of shingles for the garage. It was a short trip, and my rear shocks needed replacing anyway. Mudflaps were dragging! Link to comment Share on other sites More sharing options...
xt2005bonbon Posted July 31, 2018 Share Posted July 31, 2018 Oh come on. Where is the picture? Link to comment Share on other sites More sharing options...
Flinkly Posted July 31, 2018 Share Posted July 31, 2018 yikes. i think i've maxed out at 650lb in the trunk, and that was a slow drive home, and puckered the butt over railroad tracks. i think mine is only "allowed" to carry 950lb total, including people and accessories. And if you get that high, you have to take into account where the weight is because there are axle ratings too, so you can't just have all 950 in the trunk. * Build Thread * 26.53 MPG - 12 month Average * Link to comment Share on other sites More sharing options...
BoozeRS05 Posted July 31, 2018 Share Posted July 31, 2018 I've maxed out around 650lbs, and my wheels were tucked in the rear. That's about as much as I'm comfortable loading myself. Again, not IN my wagon, but an addition to the thread. That was this morning. EB's Subaru journal - 2005 LegacyGT Wagon & 2014 Forester FB25 (2008 specB - RIP) IG@legacygtliving Link to comment Share on other sites More sharing options...
Max Capacity Posted August 1, 2018 Share Posted August 1, 2018 I didn't know Thule made mounts for a chair... 305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD). CHECK your oil, these cars use it. Engine Build - Click Here Link to comment Share on other sites More sharing options...
BoozeRS05 Posted August 1, 2018 Share Posted August 1, 2018 (edited) Apparently they have them for dining room tables, queen beds, dressers, sheds, etc.. I have so many favorite mods on my car, but that roof rack and fairing might be as high as anything else. I think it looks great and has been extremely helpful over the years.. My bikes back up there right now. I drove it like that for 0.8 miles and didn't exceed 30mph, just for edification. It didn't move an inch from where I tied it down. Edited August 1, 2018 by BoozeRS05 EB's Subaru journal - 2005 LegacyGT Wagon & 2014 Forester FB25 (2008 specB - RIP) IG@legacygtliving Link to comment Share on other sites More sharing options...
big ears Posted August 5, 2018 Share Posted August 5, 2018 (edited) Who says you need a truck to move a refrigerator! Edited August 5, 2018 by big ears Add photo Link to comment Share on other sites More sharing options...
web94 Posted August 6, 2018 Share Posted August 6, 2018 Cross posted, but I recently picked up a contractor table saw. It was actually pretty tricky getting the base to fit, but I wasn't surprised when it did! The guy selling it was though haha Link to comment Share on other sites More sharing options...
Turkeylord Posted August 7, 2018 Author Share Posted August 7, 2018 All set for tomorrow night’s outdoor movie. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now