SpidermanMTL Posted May 18, 2018 Share Posted May 18, 2018 Going parallel? Not sure I understand. MY BUILD TAKE 2 : http://legacygt.com/forums/showthread.php/spideys-12lgt-take-2-266018.html Link to comment Share on other sites More sharing options...
SpidermanMTL Posted May 18, 2018 Share Posted May 18, 2018 Not sure I understand. sorry.. I mis read that.. I'm not sure, will the iag fuel lines allow me to do it? or are other pieces I need? I'll be bringing it to a shop to install so I was just going to have them install parallel... don't think I'll need it yet, but may as well do it now. MY BUILD TAKE 2 : http://legacygt.com/forums/showthread.php/spideys-12lgt-take-2-266018.html Link to comment Share on other sites More sharing options...
s2baru Posted May 19, 2018 Share Posted May 19, 2018 Think of it this way a parallel fuel system will equalize the pressure across all the injectors verse the factory, the ECU if I remember right, has to correct that pressure difference. Parallel is basically equalizing the fuel pressure all across. I know car would need some adjustments with the ECU fuel tables from a tuner if you decide to do that. Bring it up and see how they feel about it Link to comment Share on other sites More sharing options...
SpidermanMTL Posted May 19, 2018 Share Posted May 19, 2018 Think of it this way a parallel fuel system will equalize the pressure across all the injectors verse the factory, the ECU if I remember right, has to correct that pressure difference. Parallel is basically equalizing the fuel pressure all across. I know car would need some adjustments with the ECU fuel tables from a tuner if you decide to do that. Bring it up and see how they feel about ithardware wise ot looks like all i'll need is the regulator and a V-fitting. MY BUILD TAKE 2 : http://legacygt.com/forums/showthread.php/spideys-12lgt-take-2-266018.html Link to comment Share on other sites More sharing options...
SpidermanMTL Posted May 19, 2018 Share Posted May 19, 2018 where do i jack, when im installing the engine mount? turbo oil pan? headers? MY BUILD TAKE 2 : http://legacygt.com/forums/showthread.php/spideys-12lgt-take-2-266018.html Link to comment Share on other sites More sharing options...
GTEASER Posted May 19, 2018 Share Posted May 19, 2018 where do i jack, when im installing the engine mount? turbo oil pan? headers?You don't really need to jack. It's more support. I think I just put a block of wood between the jack and headers and went up just enough to see the block of wood get pinched tight. The engine never really moved. GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Syndicate Posted May 19, 2018 Share Posted May 19, 2018 ...kid #4 arrived early this morning and now the little people numbers in the house are evened up, 2-boys and 2-girls. Mom and our new little lady are both doing well, now I just need that Ascent to arrive Link to comment Share on other sites More sharing options...
SpidermanMTL Posted May 19, 2018 Share Posted May 19, 2018 (edited) is there anything I monitor on my ap to check for leaks after installing my charge pipe? Edited May 19, 2018 by SpidermanMTL MY BUILD TAKE 2 : http://legacygt.com/forums/showthread.php/spideys-12lgt-take-2-266018.html Link to comment Share on other sites More sharing options...
FLlegacy Posted May 19, 2018 Share Posted May 19, 2018 Boost target, boost, boost error. Easiest thing to do is perform the boost leak test. basically remove the air filter box, plug the intake pipe, and blow into the boost reference line off the bpv. When you get a good long breath into the system plug it hold for a few seconds and see if there is still pressure when you release it. If there is, no issues. If there is not, the hunt is on for the leak. Link to comment Share on other sites More sharing options...
Sarang Posted May 20, 2018 Share Posted May 20, 2018 Does anyone have any experience with this: http://www.andersonfordmotorsport.com/afm-mr-freeze-water-methanol-injection-system/ I find it appealing since it is mechanical, but they say the tank would have to be lower than the turbo, which seems like a no-go on our cars. Link to comment Share on other sites More sharing options...
Shadow_419 Posted May 24, 2018 Share Posted May 24, 2018 I've been in Nashville the last couple of days. Doing some tourist type stuff and just relaxing/drinking lol. Very nice looking city. The Country Music HOF was super cool, and the Jack Daniel's distillery tour in Lynchburg was great. Off to Shreveport, LA for the weekend next. Crawfish festival over the weekend, and then wrapping up in Nashville early next week. Link to comment Share on other sites More sharing options...
islandborn Posted May 25, 2018 Share Posted May 25, 2018 I've been in Nashville the last couple of days. Doing some tourist type stuff and just relaxing/drinking lol. Very nice looking city. The Country Music HOF was super cool, and the Jack Daniel's distillery tour in Lynchburg was great. Off to Shreveport, LA for the weekend next. Crawfish festival over the weekend, and then wrapping up in Nashville early next week. You know.... if you wander down to Houston you can meet up with me and Zee! Or... if you give a time table we could meet you..... Link to comment Share on other sites More sharing options...
Falcor Posted May 25, 2018 Share Posted May 25, 2018 You know.... if you wander down to Houston you can meet up with me and Zee! Or... if you give a time table we could meet you..... This weekend UP is cutting over the new bridge we went to a couple weeks ago south of Houston. I'm not going to this one since I went to the last install. My boss gets to spend Memorial Day Weekend at this job site. Link to comment Share on other sites More sharing options...
Shadow_419 Posted May 25, 2018 Share Posted May 25, 2018 You know.... if you wander down to Houston you can meet up with me and Zee! Or... if you give a time table we could meet you..... I won't have time this trip but I was tempted. I have a cousin that lives in Houston that I haven't seen in forever. He has a supercharged Camaro and a 68 Mustang. Link to comment Share on other sites More sharing options...
GTEASER Posted May 25, 2018 Share Posted May 25, 2018 This weekend UP is cutting over the new bridge we went to a couple weeks ago south of Houston. I'm not going to this one since I went to the last install. My boss gets to spend Memorial Day Weekend at this job site.Do you work for UP? Or an outside contractor? GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
davidbush05 Posted May 25, 2018 Share Posted May 25, 2018 Random thought... Does anyone else think that this would make a BADA$$ “Legacy GTRS”?!?!! [emoji848][emoji6] Link to comment Share on other sites More sharing options...
DugsSin Posted May 25, 2018 Share Posted May 25, 2018 I'll take one long as she makes forced induction noises. Link to comment Share on other sites More sharing options...
cww516 Posted May 26, 2018 Share Posted May 26, 2018 Might need to raise that roofline another 6-8" if they want to shoehorn me in there. Actually, that looks a lot closer to the Toyoscibaru... Link to comment Share on other sites More sharing options...
coco26 Posted May 26, 2018 Share Posted May 26, 2018 (edited) So it looks like I somehow messed up my cv boot when changing my wheel bearing. It looks perfectly fine but there's grease everywhere. Does that mean whole new axle or should I try the "Shaft and joint kit" (28391AJ011)? Other wheel bearing doesn't feel great either. There goes the rest of my mod money... Edited May 26, 2018 by coco26 Link to comment Share on other sites More sharing options...
DrD123 Posted May 26, 2018 Share Posted May 26, 2018 if one of the bands is just broken/damaged, but the boot is fine, you could probably just reband it so that it seals. (might want to repack it with grease, though) Link to comment Share on other sites More sharing options...
DrD123 Posted May 26, 2018 Share Posted May 26, 2018 Saw this over on NASIOC So....this is not normal? had to reply that no, that is definitely not normal... sort of felt bad laughing when I saw the videos... Link to comment Share on other sites More sharing options...
Zee199969 Posted May 26, 2018 Share Posted May 26, 2018 So i just did the front motor mount and other suspension bits. Started tweaking the Konis and noticed this with the engine. It shouldn't be shaking this much right? http://photos.app.goo.gl/AurWF3q9ur6TJw3ZA My "Build" Link to comment Share on other sites More sharing options...
FLlegacy Posted May 27, 2018 Share Posted May 27, 2018 So i just did the front motor mount and other suspension bits. Started tweaking the Konis and noticed this with the engine. It shouldn't be shaking this much right? http://photos.app.goo.gl/AurWF3q9ur6TJw3ZAIt looks more like your intercooler lost a bracket or bolt. Sent from my SAMSUNG-SM-G920A using Tapatalk Link to comment Share on other sites More sharing options...
Zee199969 Posted May 27, 2018 Share Posted May 27, 2018 It looks more like your intercooler lost a bracket or bolt. Looked at all the mounts and bolts for the TMIC and everything is in there good and solid. Gave it a couple of knocks on the top and there isn't any appreciable play. My "Build" Link to comment Share on other sites More sharing options...
Shadow_419 Posted May 28, 2018 Share Posted May 28, 2018 The new mount may just be transferring a little more vibration due to it being new and a higher durometer of rubber. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now