Humble Rumble Posted April 4, 2018 Author Share Posted April 4, 2018 Wanted to follow up on the VLEDs Triton V6 brake lights with the VLR6 Pro Resistors. I've had them installed for about a week and a half, and my dash light gremlins have completely vanished. Even my issue with occasional blinking TPMS has disappeared too! Snapped a pic of them installed so you can see just how easy this setup is to get together. You can see the base of the Triton in the upper left, next to the T-Connector, which goes to the bulb socket and to the resistor, which is adhered to the metal part of the body just in front of the taillights. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Humble Rumble Posted April 8, 2018 Author Share Posted April 8, 2018 Installed a gloss black lower grille garnish provided to me by user carpenterltd. Just a simple, pre-cut strip of vinyl, but I *love* the way it looks now. Such a subtle change but makes such a huge difference. Resembles the JDM S-Package front end a bit more now. Also traded out the zip ties on my foglights for proper OEM hardware, and snapped some nice clear pics from the back side of the bumper for anyone with a 10-12 wanting to add them. Also included the part numbers for the speed nut and screw needed for the 10-12 installation, because they ARE actually different part numbers and hardware from the 13-14 install. 902510034 - Speed Nut 901000171 - Screw 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Humble Rumble Posted April 8, 2018 Author Share Posted April 8, 2018 Bumper back on with the applique. Super happy with how this looks, gives the front end that extra something. Also updated the first and second posts with some current pictures. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Becks1818 Posted April 8, 2018 Share Posted April 8, 2018 Installed a gloss black lower grille garnish provided to me by user carpenterltd. Just a simple, pre-cut strip of vinyl, but I *love* the way it looks now. Such a subtle change but makes such a huge difference. Resembles the JDM S-Package front end a bit more now. Also traded out the zip ties on my foglights for proper OEM hardware, and snapped some nice clear pics from the back side of the bumper for anyone with a 10-12 wanting to add them. Also included the part numbers for the speed nut and screw needed for the 10-12 installation, because they ARE actually different part numbers and hardware from the 13-14 install. 902510034 - Speed Nut 901000171 - Screw I like that strip! Link to comment Share on other sites More sharing options...
Humble Rumble Posted April 26, 2018 Author Share Posted April 26, 2018 Updates from yesterday: -Sorted out front Koni clunk, center top-hat bolt was about a quarter turn loose -Installed CKE SSP Deep purple 75 Durometer Rear Sway Bar Bushings, likely doing the fronts today or tomorrow -Found rear right endlink was hand-loose, fully tightened Car is back to riding wonderfully, and much quieter now that everything tightened up. Bushings are a nice improvement over stock, no NVH increase either. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Humble Rumble Posted April 27, 2018 Author Share Posted April 27, 2018 Added HRW-type Rear Window Spoiler. Quality paint work from the ebay vendor and seriously perfect fit. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Humble Rumble Posted April 27, 2018 Author Share Posted April 27, 2018 Added Carbon Fiber EZ Lip with zinc brackets to improve the shape of the corners. Hated it before the brackets, love it after them. Looks a lot closer to a proper lip now than before the brackets, and I love the silver-black-silver contrast. Satisfied for $20 for the lip and $2.50 for the brackets. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
fullah Posted April 30, 2018 Share Posted April 30, 2018 Love that rear window spoiler. Do you mind sharing the link where u got It? Link to comment Share on other sites More sharing options...
Humble Rumble Posted April 30, 2018 Author Share Posted April 30, 2018 Love that rear window spoiler. Do you mind sharing the link where u got It? Check the very first post, listed under "Cosmetic - Exteior". There's a buy link right next to the item. I've been working on listing where to buy specific items where possible. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
fullah Posted April 30, 2018 Share Posted April 30, 2018 Lol sorry I didn't even notice those links. I scrolled right to the pictures. Just curious if you can measure the overall length of the spoiler for us 6th gen guys? I wonder if it will fit. If the length is right or pretty close I'll get one and be the test dummy Link to comment Share on other sites More sharing options...
Humble Rumble Posted May 2, 2018 Author Share Posted May 2, 2018 CKE SSP 75D Deep Purple Sway Bar Bushings installed in the fronts tonight. Really excellent upgrade, turn in feels really, really good now. Notice a bigger improvement from these bushings than I did from going from the 24mm sway bar to the 26mm sway bar. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
coco26 Posted May 2, 2018 Share Posted May 2, 2018 Do you see any reason to go with the "high performance" 85D's, or would they be overkill? Link to comment Share on other sites More sharing options...
Humble Rumble Posted May 2, 2018 Author Share Posted May 2, 2018 Do you see any reason to go with the "high performance" 85D's, or would they be overkill? Up to you honestly. I don't personally have extensive enough experience with upgraded bushings to comment on the difference between 75D and 85D.. I would think either is fine, though the listing for the 85D does mention possible NVH increase, but I believe it was RikGT that did the 85D bushings and said they're great as well, no increase in NVH or anything. Try messaging the seller, he's a Legacy/Outback owner as well (also an XRT guy iirc), and user "traildogck" that commented on the second page of this thread. He could tell you further. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
traildogck Posted May 14, 2018 Share Posted May 14, 2018 Thanks for the props Humble Rumble I am happy you are happy. I appreciate you posting feedback. As to the 75d vs 85d question... The 85d are a hardness what we are all familar with when it comes to the aftermarket performance. Similar to WhiteLine, AVO, Energy Suspensions. When I 1st developed the products I was concerned about adding NVH to our family cars. The 75d was a performance target which ensures no harshness. Then there were many users from the outback forum who purchased the 75d and responded with "I want more" As it turns out, the 2010-2014 and the 2015-2018 chassis are more isolated from road inputs than say the Gen4/Leggy. There have been no reports of unwanted NVH with the harder 85d. The general consensus over there is go straight with the 85d. However, I think it can depend on some other car details. Choice of stock or rear sway bar upgrade. Use of your car, predominately loaded vs empty. Feel free to PM or email me for specific advice. My apologies to HR, thread Hijack Complete CKE SSP product information and sales : chris.ckessp@gmail.com Link to comment Share on other sites More sharing options...
fullah Posted June 1, 2018 Share Posted June 1, 2018 Just curious if you can measure the overall length of the spoiler for us 6th gen guys? I wonder if it will fit. If the length is right or pretty close I'll get one and be the test dummy Would you mind giving the length of the spoiler? Link to comment Share on other sites More sharing options...
Humble Rumble Posted June 11, 2018 Author Share Posted June 11, 2018 Would you mind giving the length of the spoiler? A bit difficult to measure it while mounted with the curve of the roof, but I got roughly 46.5" mounted, so likely a touch longer. Might be worth it to message the seller and ask directly. Upgraded my front sway bar links to Moog K750084 intended for 15+ WRX/STI. Nice and beefy compared to the stock ones. I like these because they eliminate the allen key end of the bolt so you can tighten the nut with just a box wrench. Also bought the 5-piece DAMD clone side skirt and rear bumper extension kit thanks to a 20% off eBay coupon. Getting it in body color, should be here in a week or two, going to install right away. Plan to run the rear bumper extensions (already have the middle piece) until I save up to get the Gialla rear lip painted and mounted, then plan to dismount and remount the extensions onto the Gialla. Also, officially inquired on Raptor headers, since I've heard they're out until August. Figured I can scrounge up 300-400 by then no problem. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
SpidermanMTL Posted June 11, 2018 Share Posted June 11, 2018 dude, just a heads up if they are color matching, add a coat of clear, they don't. Mine started losing paint after 2 weeks of use and that's when I realized there wasn't a clear coat... mine are all plast idipped now.... MY BUILD TAKE 2 : http://legacygt.com/forums/showthread.php/spideys-12lgt-take-2-266018.html Link to comment Share on other sites More sharing options...
Humble Rumble Posted June 11, 2018 Author Share Posted June 11, 2018 dude, just a heads up if they are color matching, add a coat of clear, they don't. Mine started losing paint after 2 weeks of use and that's when I realized there wasn't a clear coat... mine are all plast idipped now.... Will keep an eye out for that, but in their communication message about the color code, they did specifically say it would be clearcoated. I've got some on hand if they aren't coated. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
SpidermanMTL Posted June 11, 2018 Share Posted June 11, 2018 mine was the same... this is a pic if the side skirt right behind the front drivers wheel... and the passenger side.both have maybe 1000kms on them... don't want to depress you or maybe you'll get a better coat than mine.. but the paint on mime was thin.. and I got it from the same seller. MY BUILD TAKE 2 : http://legacygt.com/forums/showthread.php/spideys-12lgt-take-2-266018.html Link to comment Share on other sites More sharing options...
Chillwill007 Posted June 13, 2018 Share Posted June 13, 2018 Nice I like that side skirt rear combo do you have a link for that? Link to comment Share on other sites More sharing options...
Humble Rumble Posted June 13, 2018 Author Share Posted June 13, 2018 Nice I like that side skirt rear combo do you have a link for that? Here you go. https://www.ebay.com/itm/391724637965 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Chillwill007 Posted June 13, 2018 Share Posted June 13, 2018 Hey thanks for the link really like that set plus his rear window wing just wished he had a front lip to so I could buy all of it together Link to comment Share on other sites More sharing options...
Humble Rumble Posted June 13, 2018 Author Share Posted June 13, 2018 Hey thanks for the link really like that set plus his rear window wing just wished he had a front lip to so I could buy all of it together Unfortunately, the front lip on the bronze car in that ad's pictures is a different manufacturer (Bayson R), and more unfortunately is discontinued. I've been after that front lip for 1.5+ years and finally got an answer a couple months ago that they will not be reproducing any more. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Chillwill007 Posted June 13, 2018 Share Posted June 13, 2018 He has an eBay add with that lip as a jdm lip and wants like $1,100 for it. Isn't this one it https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F390615454630 Link to comment Share on other sites More sharing options...
Humble Rumble Posted June 13, 2018 Author Share Posted June 13, 2018 He has an eBay add with that lip as a jdm lip and wants like $1,100 for it It was only $104.99, they add that extra $1000 to their listings to show that something is out of stock. I don't know why they haven't fully removed the listing yet, but I received this correspondence from Bayson last time I inquired. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now