Moderators BarManBean Posted March 1, 2013 Moderators Share Posted March 1, 2013 Hey folks, I recently started talking to Paul at Primitive Racing about possibly doing a local group buy of sorts on some skid plates. I figure it's gotta be cheaper if he's able to ship a number of them at once, plus any discount that might come with ordering a number of them. Everything would be shipped to one location near Springfield, VA and the plates would need to be picked up there. I don't have pricing or numbers yet, but will update here as I find out more. For general pricing, check out the website (http://www.writerguy.com/primitive/skid.htm). In talking to him a while back, a basic 1/8" skid plate was $215 + $25.55 for shipping. $18 extra for fumoto access and $16 extra for oil access. If you are interested let me know and I'll get a list going. Teh list: BarmanBean ('05 OBXT) w/Fumoto F105s 1/8" front $199 no holes, no mod needed for Fumoto = $199-12%=176+18=194BMB's friend ('12 WRX) w/Fumoto F105s 1/8" front $199 + $20 for Fumoto placed oil holes = $219-12%=193+18=211xero287 ('11 WRX) w/oil hatches 3/16" front $239 + $20 + $50 bolt-on oil hatches = $309-12%=272+18=290tsunami ('07 LGT, tomei ELH) w/Tomei EL Headers and Fumoto F-105N oil holes 1/8" front $199 + $20 for Fumoto Oil holes + $18 header spacers = $237-12%=209+18=227S0CalGT ('05 LGT JDM ELH) w/JDM Spec C EL Headers no holes 1/8" Front $199 + $9 mild header spacers = $208-12%=184+18=202 UPDATED PRICE BREAK DOWN (assuming 6 orders): All 1/8" front skidplates: $199All 3/16" front skidplates - $239Fumoto cutout&valve add on - $49Fumoto cutout only - $20Oil access holes - $20Header spacers - $20 Updated Pricing: Use the above values to figure the price of your plate. Take 15% off and add $15 for shipping. All plates would be shipped to Springfield, VA. For example, my plate would be a 1/8" + fumoto cut out + oil access cutout ($199 + $20 + $20 = $239 - 15% = $203.15 + $15 = $218.15) "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
mr.hicksta Posted March 1, 2013 Share Posted March 1, 2013 The 1/8" skid plate is $199 on the site now and the 3/16" is $239. Either way, I'm interested Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted March 1, 2013 Author Moderators Share Posted March 1, 2013 Let me know what car you have as well. I don't think this will need to be limited to LGT / OBXT only. I have a couple friends with WRXs / STIs that may also be interested. "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
xero287 Posted March 2, 2013 Share Posted March 2, 2013 Can I get one for my car? Link to comment Share on other sites More sharing options...
mr.hicksta Posted March 2, 2013 Share Posted March 2, 2013 Let me know what car you have as well. I don't think this will need to be limited to LGT / OBXT only. I have a couple friends with WRXs / STIs that may also be interested. 2008 Legacy GT Limited sedan! Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted March 2, 2013 Author Moderators Share Posted March 2, 2013 Can I get one for my car? Yes. "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
xero287 Posted March 2, 2013 Share Posted March 2, 2013 2011 wrx wagon premium. I'm in. Link to comment Share on other sites More sharing options...
tsunami Posted March 3, 2013 Share Posted March 3, 2013 I need this. 2007 Legacy GT. Now what to do about those fmic pipes. How "easy" would it be to cut the plate in order to allow the pipes to go through. I currently have the Racerx Link to comment Share on other sites More sharing options...
xero287 Posted March 3, 2013 Share Posted March 3, 2013 Anything is easy with my angle grinder lol Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted March 3, 2013 Author Moderators Share Posted March 3, 2013 I need this. 2007 Legacy GT. Now what to do about those fmic pipes. How "easy" would it be to cut the plate in order to allow the pipes to go through. I currently have the Racerx Added. "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
tsunami Posted March 4, 2013 Share Posted March 4, 2013 Just to make sure, these skidplates would also clear my tomei elh right? Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted March 4, 2013 Author Moderators Share Posted March 4, 2013 If you have aftermarket headers you need to let me know. The skid plates are designed for use with stock headers, thanks for making me clear that up. I would imagine that Paul might have solutions for aftermarket units but would definitely need to know in advance. Honestly I'll have to check. "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
mr.hicksta Posted March 4, 2013 Share Posted March 4, 2013 GrimmSpeed setup here so I'd imagine I'll be fine. Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted March 4, 2013 Author Moderators Share Posted March 4, 2013 GrimmSpeed setup here so I'd imagine I'll be fine. EL or UEL? "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
mr.hicksta Posted March 4, 2013 Share Posted March 4, 2013 el or uel? Unequal Length Link to comment Share on other sites More sharing options...
xero287 Posted March 5, 2013 Share Posted March 5, 2013 If anyone needs car work done I just got a hookup in bristow va. Link to comment Share on other sites More sharing options...
xero287 Posted March 6, 2013 Share Posted March 6, 2013 Any ETA on this? I'm trying to go low soon XD Link to comment Share on other sites More sharing options...
mmmmspecb Posted March 7, 2013 Share Posted March 7, 2013 ugh, I see a "local" group buy for a skid plate and then find out it's Virginia. Damnit lol. Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted March 7, 2013 Author Moderators Share Posted March 7, 2013 Any ETA on this? I'm trying to go low soon XD I didn't have a specific time frame in mind. I'll send paul another message to let him know what kind of interest we have so far and see what he says. "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
mr.hicksta Posted March 7, 2013 Share Posted March 7, 2013 FYI, I want mine with the oil filter and Fumoto openings EDIT: PLEASE MIKE Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted March 7, 2013 Author Moderators Share Posted March 7, 2013 Just sent paul a message with some additional info. I proposed that he give me a base price for the plates and then some additional prices for add-ons to include fumoto / oil filter cut outs as well as a price for upgrading to thicker metal. Will report back "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
xero287 Posted March 7, 2013 Share Posted March 7, 2013 Ain't nobody got time for patience. Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted March 7, 2013 Author Moderators Share Posted March 7, 2013 Added some pricing details to the original post. May look to actually open this up to a full group buy if Paul is interested and we can hash out details. "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
xero287 Posted March 8, 2013 Share Posted March 8, 2013 ....free shipping. Link to comment Share on other sites More sharing options...
Moderators BarManBean Posted March 8, 2013 Author Moderators Share Posted March 8, 2013 Meh. Was certainly hoping for more but the number is just pretty low. The overall shipping cost isn't much cheaper from the looks of things compared to the normal shipping rate so I think it might make more sense to just arrange a normal group buy and Paul could ship plates to individuals. Waitin to hear of he even has interest in this or not. "Bullet-proof" your OEM TMIC! <<Buy your kit here>> Not currently in stock Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.