xrayspecs Posted August 26, 2021 Share Posted August 26, 2021 I have a sedan with Koni Yellow, and an aftermarket rear strut brace. trying to get in to adjust the rebound on the konis is a royal pain. i cut down a koni adjuster so that i could get into the notch on the strut bar. Has anyone made or gotten longer adjusters? or another solution for this? anything is better than grabbing the cut down adjuster with my plyers and hoping i make the right and left match. Link to comment Share on other sites More sharing options...
Infosecdad Posted August 26, 2021 Share Posted August 26, 2021 I’ve 3D printed some longer ones; also made a really long one with a little 1/2”? Pipe Link to comment Share on other sites More sharing options...
xrayspecs Posted August 26, 2021 Author Share Posted August 26, 2021 I’ve 3D printed some longer ones; also made a really long one with a little 1/2”? Pipe The whole time i was trying to make the adjustment i was thinking this is a perfect application for a 3d printer. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now