ktmrider Posted June 19, 2018 Share Posted June 19, 2018 Just swapped LGTs for my first auto equipped Subaru ( yes by choice, young driver getting license ). Trans shifted a bit weird and TC lockup was erratic. Made sure fluids were topped off and looked/smelled Ok. Had a noisy PS pump when cold, decided to swap the notorious o-ring and check hoses. Suction line was quite hard and had visible signs of leakage so I snipped 15mm off the end as a temp fix. PS way better but also noticed the trans "feels" a ton better including TC lockup. Assume the PS was sucking air all the time and putting a high(er) load on the engine. Is the 5EAT that sensitive to engine load? Link to comment Share on other sites More sharing options...
utc_pyro Posted June 19, 2018 Share Posted June 19, 2018 Yes. Look up the calculated torque table. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.