ssulb Posted April 17, 2021 Share Posted April 17, 2021 (edited) I recently spotted a 5th gen at my local junkyard. Same color as mine with the OEM spoiler and a reverse camera. I want to take the entire trunk but not sure how to disconnect the wiring harness and I don't want to cut it. Fellow Legacy owners, have you ever removed your trunks? lol How would you disconnect the wiring harness to the trunk. Is there like a body to trunk connector somewhere? Edited April 20, 2021 by ssulb Link to comment Share on other sites More sharing options...
ssulb Posted April 17, 2021 Author Share Posted April 17, 2021 Just took a look at the FSM and found a connector R24/R60. Not sure where it would be located but my guess is somewhere under the partial shelf panel. Link to comment Share on other sites More sharing options...
Humble Rumble Posted April 19, 2021 Share Posted April 19, 2021 Hopefully this will be helpful.MSA5T1009A297624.pdf 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
ssulb Posted April 20, 2021 Author Share Posted April 20, 2021 (edited) Hopefully this will be helpful. Thank you very much for the PDF. Where did you find this info? I have the FSM and many other PDFs manuals but I don't think I have it all. I actually went to the junkyard and saw the trunk was in pretty bad shape. Lots of scratches, dents on top, rust holes on the bottom of it (typical), and rust near license plate holes. Also I realized it is a different silver color. Mine is Steel Silver Metallic and this one was Ice Silver Metallic. And sadly no backup camera. The picture the junkyard posted was low quality and I thought I saw something sticking out that looked like the camera. I ended up just taking the OEM spoiler and made a template where the hole line up on the trunk. Test fit on my car. I actually really like the look of the OEM spoiler. I also took the OEM radio with the 4.3" screen. I am going to make a harness and get it working with my car. I could just upgrade to something aftermarket but I sort of wanted to stick with the OEM look. Plus I got this one for a very good price. I took the radio, harness, connectors, USB port, and SXM antenna. I would love to get the 2013 Navigation head unit some day and upgrade to that. Edited April 20, 2021 by ssulb Link to comment Share on other sites More sharing options...
pseudonym Posted April 20, 2021 Share Posted April 20, 2021 Nice find on the spoiler. I wanna do the same and I'm sure eventually will but theres a million other things ahead of it. I wouldn't have guessed the trunk harness was so involved. Link to comment Share on other sites More sharing options...
Humble Rumble Posted April 20, 2021 Share Posted April 20, 2021 Unless you're dead set on having the OEM spoiler with a functional brakelight, I'd recommend dremmeling off the embedded screws and and mounting with 3M body adhesive instead of drilling any holes. Will keep your trunk clean if you ever feel like removing it in the future, and be easier to mount and dismount. Did that with mine and it held more than strong enough for the spoiler to be used as a lift point for the trunk. That said, if you want functioning brake light, yeah, go with the template. And yeah, the factory spoiler is a really good addition if your car has had a naked trunk for most of its life. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
ssulb Posted April 20, 2021 Author Share Posted April 20, 2021 Unless you're dead set on having the OEM spoiler with a functional brakelight, I'd recommend dremmeling off the embedded screws and and mounting with 3M body adhesive instead of drilling any holes. Will keep your trunk clean if you ever feel like removing it in the future, and be easier to mount and dismount. Did that with mine and it held more than strong enough for the spoiler to be used as a lift point for the trunk. That said, if you want functioning brake light, yeah, go with the template. And yeah, the factory spoiler is a really good addition if your car has had a naked trunk for most of its life. The brake light would be nice but I can live without it. Using 3M body adhesive is a good idea as it doesn't involve drilling holes. I am just worried it might not hold strong but if you say it held strong for you then I think it is worth it to try out. Link to comment Share on other sites More sharing options...
Humble Rumble Posted April 21, 2021 Share Posted April 21, 2021 (edited) Make sure to get 3M VHB specifically, and I can promise it will hold as long as you clean and prep the surface properly. VHB is even stronger than normal 3M. Here's my post from mounting it, scroll through the pictures to see how I did the tape on it. https://www.instagram.com/p/BytTEQmgBWH/ Edited April 21, 2021 by Humble Rumble 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Plastixx Posted April 21, 2021 Share Posted April 21, 2021 (edited) Thank you very much for the PDF. Where did you find this info? I have the FSM and many other PDFs manuals but I don't think I have it all. There's a bonus on that USB drive I sent. I ended up just taking the OEM spoiler and made a template where the hole line up on the trunk. Would you be willing to pass on that template when you're done with it? I've been thinking about getting an OEM spoiler, but don't want to deal with trying to get the holes aligned on my own. Also, I have a factory bluetooth kit in my car. If you're interested, I wouldn't mind swappig it for your cubby. Edited April 21, 2021 by Plastixx Link to comment Share on other sites More sharing options...
ssulb Posted April 21, 2021 Author Share Posted April 21, 2021 (edited) Make sure to get 3M VHB specifically, and I can promise it will hold as long as you clean and prep the surface properly. VHB is even stronger than normal 3M. Here's my post from mounting it, scroll through the pictures to see how I did the tape on it. https://www.instagram.com/p/BytTEQmgBWH/ Yup, I agree the prep work and a clean surface is the most important step. There's a bonus on that USB drive I sent. Oh sweet. Can't wait to see it. Thank you. Would you be willing to pass on that template when you're done with it? I've been thinking about getting an OEM spoiler, but don't want to deal with trying to get the holes aligned on my own. Also, I have a factory bluetooth kit in my car. If you're interested, I wouldn't mind swappig it for your cubby. Sure no problem. I can make a cleaner version of the template and pass it on. Or maybe I can figure out a way you can just print it and tape several pieces of paper together at like dashed lines. I have the OEM H/K Bluetooth kit that is already built-in so I don't need the Bluetooth kit that goes into the cubby. Thanks always though. Edited April 21, 2021 by ssulb Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now