WRX USA Posted July 12, 2018 Author Share Posted July 12, 2018 (edited) Went yurt camping on the Oregon Coast and passed 140k on the body and 5k on the new IAG block. No issues. Edited July 12, 2018 by WRX USA Link to comment Share on other sites More sharing options...
WRX USA Posted July 13, 2018 Author Share Posted July 13, 2018 Scheduled my hybrid speed density tune at Surgeline for September 4th. I also received my AVO rear underbody braces from Infamous (msprank) along with loads of swag! Link to comment Share on other sites More sharing options...
WRX USA Posted July 14, 2018 Author Share Posted July 14, 2018 I got a new rear ashtray that fits above the rear cup holders from ValleyLegacy for my EDM center console (92172AG010JC). I like to be fully optioned and any additional storage space in these cars is nice. Link to comment Share on other sites More sharing options...
boxkita Posted July 16, 2018 Share Posted July 16, 2018 Scheduled my hybrid speed density tune at Surgeline for September 4th. I also received my AVO rear underbody braces from Infamous (msprank) along with loads of swag! I wondered who got those... Build my car Boxkita Track days Link to comment Share on other sites More sharing options...
WRX USA Posted August 7, 2018 Author Share Posted August 7, 2018 I pulled the heated seat elements out of my stock seats and I plan on installing those in my JDM Recaros this weekend. Link to comment Share on other sites More sharing options...
limberpineobxt Posted August 7, 2018 Share Posted August 7, 2018 That's awesome! Can't wait to hear how it turns out! Link to comment Share on other sites More sharing options...
WRX USA Posted August 13, 2018 Author Share Posted August 13, 2018 (edited) It was a little tricky, but installed the OEM heated seat elements in my JDM STi Recaro’s. Edited August 13, 2018 by WRX USA Link to comment Share on other sites More sharing options...
WRX USA Posted September 4, 2018 Author Share Posted September 4, 2018 I dropped off my car for the hybrid speed density tune this morning. It should be on the dyno this afternoon around 3pm. Link to comment Share on other sites More sharing options...
WRX USA Posted September 5, 2018 Author Share Posted September 5, 2018 (edited) It was warmer this time at the dyno so the numbers would be higher under cooler conditions but it worked out perfectly...402whp! Previous numbers were 380whp/360tq. New numbers are 402whp/358tq. Now the ‘S402’ badging on the grille, which freaks out the purist, actually means something and I’m seriously thinking about throwing the ‘S402’ badge that I have on the back. Edited September 5, 2018 by WRX USA Link to comment Share on other sites More sharing options...
rebourne Posted September 5, 2018 Share Posted September 5, 2018 Those are some solid numbers. pic thread build thread Link to comment Share on other sites More sharing options...
shralp Posted September 5, 2018 Share Posted September 5, 2018 Meaty numbers! Chris did you right! Link to comment Share on other sites More sharing options...
legacybt Posted September 5, 2018 Share Posted September 5, 2018 Damn. Nice curves and numbers! That's on pump gas? I might have to do that heated seat thing too... Thanks for giving it a go! Link to comment Share on other sites More sharing options...
WRX USA Posted September 5, 2018 Author Share Posted September 5, 2018 Damn. Nice curves and numbers! That's on pump gas? I might have to do that heated seat thing too... Thanks for giving it a go! Thanks! This is on Oregon 92 octane. Link to comment Share on other sites More sharing options...
WRX USA Posted September 7, 2018 Author Share Posted September 7, 2018 Before and after Hybrid Speed Density tune: Link to comment Share on other sites More sharing options...
WRX USA Posted September 15, 2018 Author Share Posted September 15, 2018 (edited) Installed Redline hood struts: I was a little reluctant because the brackets rivet on but they seem to work perfectly. https://www.redlinetuning.com/product-p/21-36003-03.htm Edited September 15, 2018 by WRX USA Link to comment Share on other sites More sharing options...
WRX USA Posted September 18, 2018 Author Share Posted September 18, 2018 Excellent Blackstone results Link to comment Share on other sites More sharing options...
xt2005bonbon Posted September 19, 2018 Share Posted September 19, 2018 Great. Now is the time to restore your headlights. Link to comment Share on other sites More sharing options...
WRX USA Posted September 19, 2018 Author Share Posted September 19, 2018 Great. Now is the time to restore your headlights. No need to hide, I have the 3M kit but apparently you have to use it to benefit. Link to comment Share on other sites More sharing options...
xt2005bonbon Posted November 7, 2018 Share Posted November 7, 2018 Exactly, I cut off one of the teeth so that it would fit. Make sure to take off the o-ring first before you cut. http://i672.photobucket.com/albums/vv87/JoshEAllen/A6B6154F-7205-4117-99DF-CBC5827438B6.jpg I know this is an old post, but where did you get that connector? Was this your OEM USDM turn/parking signal socket, which you slightly modified to fit the JDM housing? If that is correct, then this facelift USDM connector is definitely different than the 05-07 ones. I just realized I cannot fit my OEM USDM 05 connector to the JDM headlight. Way too big. Link to comment Share on other sites More sharing options...
WRX USA Posted November 8, 2018 Author Share Posted November 8, 2018 I’m pretty sure I got those connectors on Amazon. That connector fit the JDM housing. I modified my JDM housings to fit the USDM connector and that is what I’m using right now with the switchback LEDs. Link to comment Share on other sites More sharing options...
xt2005bonbon Posted November 8, 2018 Share Posted November 8, 2018 I’m pretty sure I got those connectors on Amazon. That connector fit the JDM housing. I modified my JDM housings to fit the USDM connector and that is what I’m using right now with the switchback LEDs. Would you be able to retrieve the Amazon link to that connector when you have a moment? I know it is at least a 2 year old purchase you did . And do you recall which bulb you used for it? Cause I know that the UDSM double filament bulb can't even fit in the JDM housing. Link to comment Share on other sites More sharing options...
rhino6303 Posted November 8, 2018 Share Posted November 8, 2018 Would you be able to retrieve the Amazon link to that connector when you have a moment? I know it is at least a 2 year old purchase you did . And do you recall which bulb you used for it? Cause I know that the UDSM double filament bulb can't even fit in the JDM housing.These should work. https://www.amazon.com/dp/B06XRFRVTQ/ref=cm_sw_r_cp_apa_Mp74Bb69QXSTM Link to comment Share on other sites More sharing options...
xt2005bonbon Posted November 8, 2018 Share Posted November 8, 2018 These should work. https://www.amazon.com/dp/B06XRFRVTQ/ref=cm_sw_r_cp_apa_Mp74Bb69QXSTM Thanks a LOT. Do you think this bulb would fit that connector? If yes, then it would be almost plug and play with a little bit of soldering. https://www.ebay.com/p/Turn-Signal-Light-Bulb-Front-ACDelco-GM-Original-Equipment-13579188/115057720?iid=181881830666 Link to comment Share on other sites More sharing options...
WRX USA Posted November 8, 2018 Author Share Posted November 8, 2018 Would you be able to retrieve the Amazon link to that connector when you have a moment? I know it is at least a 2 year old purchase you did . And do you recall which bulb you used for it? Cause I know that the UDSM double filament bulb can't even fit in the JDM housing. uxcell 5PCS DC 12V T20 7443 Car Auto Light Lamp Pre-wired Wiring Sockets w Three Wires https://www.amazon.com/dp/B00DC4XS3M/ref=cm_sw_r_cp_tai_s574BbYB4RNY0 Link to comment Share on other sites More sharing options...
xt2005bonbon Posted November 8, 2018 Share Posted November 8, 2018 (edited) I just realized that this socket is used for our tail/brake lights too. And when I got my JDM tail lights a couple of years ago, they provided the wiring harness too. So I don't need to buy those . Edit: also looks like I can grab a pair of 7444NA bulbs at my local autozone. Edited November 8, 2018 by xt2005bonbon Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now