famaya26 Posted March 20, 2018 Share Posted March 20, 2018 Just buy the JDM one. Link to comment Share on other sites More sharing options...
WRX USA Posted March 20, 2018 Share Posted March 20, 2018 (edited) Another option is the Syms F.E.R. (Front End Reinforcement) which should improve handling by reducing weight at the very front of the chassis. They also claim better cooling by reducing the obstructions to the radiator. http://www.syms.jp/shop/g_images/FER-l.jpg SYMS FER weight · · · 1.75 kg http://www.syms.jp/shop/main.cgi?mode=details&sid=1&gid=1S000194 Edited March 21, 2018 by WRX USA Link to comment Share on other sites More sharing options...
stocklgt Posted March 20, 2018 Share Posted March 20, 2018 (edited) thats pretty sweet, but its not in the states from what i can find. what did everyone do as far as 1) wheel wells and 2) undertray wondering if the RalliTEK skidplate would fit with the front bumper... As far as foglights, i think im gonna pull the zip tie trick. Any issues with JDM headlights mounting up with the usdm headlight mounts? Any other tips or tricks would be appreciated. Edited March 20, 2018 by stocklgt Link to comment Share on other sites More sharing options...
WRX USA Posted March 20, 2018 Share Posted March 20, 2018 thats pretty sweet, but its not in the states from what i can find. It’s available on Yahoo Japan Auctions. Sadly, US companies, like Oswald Performance, never made a lightweight beam for the BL/BP chassis. Link to comment Share on other sites More sharing options...
Guest Posted March 21, 2018 Share Posted March 21, 2018 I think he was saying both beams i linked on here were the same... I know they are def not the same, usdm and jdm. Just wondering how much cutting is truly involved. I found one for $170 shipped, just want to be 100% sure before ordering it It's nice to get JDM beam because then you can get the foam inserts and they will fit the beam and the bumper skin perfectly. Getting the foam even new from Japan is not very expensive. They are pretty cheap and light so shipping is not much. You got a pm - I have a spare JDM front beam I can sell. Link to comment Share on other sites More sharing options...
stocklgt Posted March 21, 2018 Share Posted March 21, 2018 thanks man ill take it, sent you a pm back! Link to comment Share on other sites More sharing options...
WRX USA Posted March 21, 2018 Share Posted March 21, 2018 (edited) Another option is the Syms F.E.R. (Front End Reinforcement) which should improve handling by reducing weight at the very front of the chassis. They also claim better cooling by reducing the obstructions to the radiator. http://www.syms.jp/shop/g_images/FER-l.jpg SYMS FER weight · · · 1.75 kg http://www.syms.jp/shop/main.cgi?mode=details&sid=1&gid=1S000194 For comparisons sake the EDM beam that I bought from Partsouq weighs 4.55 kg. (https://partsouq.com/en/search/all?q=57712AG320) What I don’t know is the weight of the USDM beam, but the delta between these two is only 6.17 pounds so not major weight. Available here: https://buyee.jp/item/yahoo/shopping/toptuner-store_sym64248210001?lang=en&rc=yshop Edited March 21, 2018 by WRX USA Link to comment Share on other sites More sharing options...
stocklgt Posted March 22, 2018 Share Posted March 22, 2018 now im torn... liberal albero bumper for maximum FMIC fitment or spec b front bumper with sti lip for clean OEM look? Link to comment Share on other sites More sharing options...
famaya26 Posted March 22, 2018 Share Posted March 22, 2018 now im torn... liberal albero bumper for maximum FMIC fitment or spec b front bumper with sti lip for clean OEM look? Liberal Albero Link to comment Share on other sites More sharing options...
stocklgt Posted March 22, 2018 Share Posted March 22, 2018 Liberal Albero Yep, thats what I chose with an sti front lip. cant wait! Link to comment Share on other sites More sharing options...
stocklgt Posted March 23, 2018 Share Posted March 23, 2018 going pre-facelift with an albero bumper and jdm pre headlights and fenders. I can't think of anyone that actually went back a generation lol. Am I the only one, or does someone have pictures for me of rev a-c front end and d-f rear? Wonder how its gonna look with the 08-09 rear, but im giving it a shot. Link to comment Share on other sites More sharing options...
battelready Posted March 24, 2018 Share Posted March 24, 2018 going pre-facelift with an albero bumper and jdm pre headlights and fenders. I can't think of anyone that actually went back a generation lol. Am I the only one, or does someone have pictures for me of rev a-c front end and d-f rear? Wonder how its gonna look with the 08-09 rear, but im giving it a shot. There are some who go facelifted rear with the older front which is basically the same. The pre-facelift bumpers are easier to get and do a swap with in any case. I bought an auto be more involved in my uninvolvedness . 200k+ Club If you can't blind them with brilliance, baffle them with bullshit. My high mileage turd. Link to comment Share on other sites More sharing options...
PimpFro Posted March 29, 2018 Share Posted March 29, 2018 (edited) Will hopefully be toying with the JDM front over this summer. I will be looking through this for hints/tips and tricks for getting the conversion done. Just a bumper cover with brackets/fogs on the way this far, looks like i will need a JDM bumper beam (if I don't want to cut) and a JDM grille, possibly headlight brackets and fender liners. Not sure what else but I will keep reading/researching this thread. Thanks for the information built up thus far Edited March 29, 2018 by PimpFro Fat finger/auto correct Pure Adrenaline Attached... To A License Plate Link to comment Share on other sites More sharing options...
05Jdm2.0gt Posted April 2, 2018 Share Posted April 2, 2018 JDM 3.0R with lip Corazon grill Sent from my LG-LS998 using Tapatalk Link to comment Share on other sites More sharing options...
Waxiboy Posted April 5, 2018 Share Posted April 5, 2018 Can the USDM under tray still be used with the JDM front? I want to stick with the stock ones only because of the oil filter window. Link to comment Share on other sites More sharing options...
magnusonsubie Posted April 5, 2018 Share Posted April 5, 2018 Can the USDM under tray still be used with the JDM front? I want to stick with the stock ones only because of the oil filter window.Yes, but you need to trim the front end ever so slightly. I ended up trimming mine while putting the bumper on so I knew how much I needed to trim. 2005 Vader Wagon Material Tests on Ringland Failure Piston I should have held off and purchased a wagon instead of the spec.B Link to comment Share on other sites More sharing options...
famaya26 Posted April 5, 2018 Share Posted April 5, 2018 (edited) Correction: 2008 STI trays work with JDM bumpers Edited April 5, 2018 by famaya26 Link to comment Share on other sites More sharing options...
Waxiboy Posted April 5, 2018 Share Posted April 5, 2018 Correction: 2008 STI trays work with JDM bumpers Do they have a window for the oil filter? Link to comment Share on other sites More sharing options...
famaya26 Posted April 5, 2018 Share Posted April 5, 2018 Do they have a window for the oil filter? Link to comment Share on other sites More sharing options...
WRX USA Posted April 8, 2018 Share Posted April 8, 2018 (edited) Liberal rear wing, JDM Subaru rear garnish, Liberal rear under protector on JDM Outback bumper and Valenti taillights. Edited April 8, 2018 by WRX USA Link to comment Share on other sites More sharing options...
05Jdm2.0gt Posted April 29, 2018 Share Posted April 29, 2018 (edited) have to fix the stance but here she is as it sits Sent from my LG-LS998 using Tapatalk Edited April 30, 2018 by 05Jdm2.0gt Link to comment Share on other sites More sharing options...
Darryn Posted May 15, 2018 Share Posted May 15, 2018 For comparisons sake the EDM beam that I bought from Partsouq weighs 4.55 kg. (https://partsouq.com/en/search/all?q=57712AG320) What I don’t know is the weight of the USDM beam, but the delta between these two is only 6.17 pounds so not major weight. Available here: https://buyee.jp/item/yahoo/shopping/toptuner-store_sym64248210001?lang=en&rc=yshop I weighed both the USDM and JDM beams (with an analog scale, I don't own a digital one) and the USDM beam weight something like 15 lbs, but the JDM one is 6 of so. So basically, on a JDM car, you would only save a couple of lbs with the Syms part, while on a USDM car it would probably be cheaper to buy the JDM bumper beam for less money unless you really need that extra air flow in front of the radiator. I was actually a bit disappointed to find that the bumper beam only saved me 9 lbs or so, since the Rallitek skidplate that I am about to add weights about 12 to 13 lbs more than the stock engine under-tray / splash-guard. Link to comment Share on other sites More sharing options...
xt2005bonbon Posted June 26, 2018 Share Posted June 26, 2018 Bumping this thread and posting the sad news that I had to cancel the purchase I made exactly 6 months ago! Bought a front bumper, headlights, bumper beam, fenders, and some other miscellaneous parts. Never seen them . Apparently got shipped from the UK to the US. Seller said yesterday the palette is on its way back to the UK . Luckily, I contacted Paypal yesterday to make sure I get reimbursed. Today was the 180 day deadline for refunds! Link to comment Share on other sites More sharing options...
famaya26 Posted June 26, 2018 Share Posted June 26, 2018 Bumping this thread and posting the sad news that I had to cancel the purchase I made exactly 6 months ago! Bought a front bumper, headlights, bumper beam, fenders, and some other miscellaneous parts. Never seen them . Apparently got shipped from the UK to the US. Seller said yesterday the palette is on its way back to the UK . Luckily, I contacted Paypal yesterday to make sure I get reimbursed. Today was the 180 day deadline for refunds! Damn Keep a lookout at your local importers. A couple days ago i found a Face lift Spec B front end for a friend of mine in Houston for $900.00. When he picked it up, he found they had the sedan rear end as well. He got both for less than any of us have paid for any front end. Link to comment Share on other sites More sharing options...
famaya26 Posted June 26, 2018 Share Posted June 26, 2018 Bumping this thread and posting the sad news that I had to cancel the purchase I made exactly 6 months ago! Bought a front bumper, headlights, bumper beam, fenders, and some other miscellaneous parts. Never seen them . Apparently got shipped from the UK to the US. Seller said yesterday the palette is on its way back to the UK . Luckily, I contacted Paypal yesterday to make sure I get reimbursed. Today was the 180 day deadline for refunds! Have you seen this? https://www.ebay.com/itm/JDM-Subaru-Legacy-Fog-Lights-Bumper-Headlight-Fenders-Hood-Grille-2007-2009-BP/113101109133?hash=item1a5559f78d:g:n2wAAOSwPHxbH88f Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now