Becks1818 Posted March 22, 2018 Share Posted March 22, 2018 I usually use Timothy.B's car as a reference, since he's running almost that exact set up. This is 18x8.5 +45 on 245/45/18. The setup Niko will have will only be a scant 3mm further in. http://i.imgur.com/Wy1bk6z.jpg http://i.imgur.com/iKIUgfJ.jpgYou sure that's 45 offset? Link to comment Share on other sites More sharing options...
Humble Rumble Posted March 22, 2018 Share Posted March 22, 2018 Positive. Talked with Tim tons when he was buying his setup. My own is 45 offset as well. 19x8.5 +45 on 245/40/19. Less than 1mm diameter difference than Tim's setup, so essentially the exact same fitment. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Perscitus Posted March 23, 2018 Share Posted March 23, 2018 Yes, Ive been running 18x8.5 ET45 wrapped in 245/45 for a few years. And I believe we had a 2.5i -> LGT owner local to me run 245/45R18s first maybe 5-6 years ago. There was also a great 19 setup many years ago in the Silver car photo gallery section. Either 245/40 or 245/45R19 with a slightly more aggressive offset, stock suspension. Link to comment Share on other sites More sharing options...
GTEASER Posted March 23, 2018 Share Posted March 23, 2018 Shadow Speed HRW Type Rear Window Spoiler arrived today. Very pleased with the quality, paint, and fit, and love the design. Need some warmer weather to install this bad boy. Link here: https://www.ebay.com/itm/272991164900 Should go well with your Blitzen wing! GTEASER's 2012 Legacy GT - Sold GTEASER's 2009 XTeaser - Sold GTEASER's 1992 Legacy SS - Sold Link to comment Share on other sites More sharing options...
Humble Rumble Posted March 23, 2018 Share Posted March 23, 2018 Should go well with your Blitzen wing! My thoughts exactly! The shapes are very complimentary. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Becks1818 Posted March 23, 2018 Share Posted March 23, 2018 Positive. Talked with Tim tons when he was buying his setup. My own is 45 offset as well. 19x8.5 +45 on 245/40/19. Less than 1mm diameter difference than Tim's setup, so essentially the exact same fitment. I only asked because they look nice and flush. Can't wait to see what my +35 offset is going to sit like lol Link to comment Share on other sites More sharing options...
Humble Rumble Posted March 23, 2018 Share Posted March 23, 2018 +35 will look suuuuuuper nice. Here's one that's sitting on 19x8.5 +45 on 245/40/19 and dropped on Bilsteins/Swift Springs, BUT with a 15mm spacers, so it actually works out to about +30. I think you'll love how +35 looks. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Becks1818 Posted March 23, 2018 Share Posted March 23, 2018 +35 will look suuuuuuper nice. Here's one that's sitting on 19x8.5 +45 on 245/40/19 and dropped on Bilsteins/Swift Springs, BUT with a 15mm spacers, so it actually works out to about +30. I think you'll love how +35 looks. Godddddd that looks good! I'll post of some pictures in a few weeks. Waiting on tire tire shop to buy me a new set of rims after they marked mine up a bit. Link to comment Share on other sites More sharing options...
Ellesedil Posted March 23, 2018 Share Posted March 23, 2018 My incoming wheels are going to be 19x9+50. But, I am considering running some small spacers so I can fit a bit wider tire before hitting the struts. Or... sneaking in some coilovers somehow. Anyway, I don't expect the wheels until May so I don't have anything really concrete yet. Link to comment Share on other sites More sharing options...
FLlegacy Posted March 23, 2018 Share Posted March 23, 2018 Purchased some used control arms, Thank you dgoodhue. When those come in I will be installing the new bushings into them and probably getting some new swaybar endlinks and ball joints for good measure. Afterwards I will put my set up for sale if anyone is interested. Link to comment Share on other sites More sharing options...
coco26 Posted March 23, 2018 Share Posted March 23, 2018 Purchased some used control arms, Thank you dgoodhue. When those come in I will be installing the new bushings into them and probably getting some new swaybar endlinks and ball joints for good measure. Afterwards I will put my set up for sale if anyone is interested. Interested if they have less rust then mine Link to comment Share on other sites More sharing options...
FLlegacy Posted March 24, 2018 Share Posted March 24, 2018 Interested if they have less rust then mine They have been in Florida all their life. Sent from my SAMSUNG-SM-G920A using Tapatalk Link to comment Share on other sites More sharing options...
Scubaboo Posted March 24, 2018 Share Posted March 24, 2018 (edited) I just noticed most people here used 18x8.5 offset 45 with 245/45/18, Will the 48 offset fit? Should I cancel my order ? I have 225 45 18's on 18x8.5 ET48's, they fit fine: https://imgur.com/WCF7QB6 Edited March 24, 2018 by Scubaboo Add pic Link to comment Share on other sites More sharing options...
coppertone Posted March 24, 2018 Share Posted March 24, 2018 This is what I run on mine... Audi love for life 2010 2.5GT limited is for sale. Link to comment Share on other sites More sharing options...
Becks1818 Posted March 24, 2018 Share Posted March 24, 2018 This is what I run on mine... Audi love for lifeI thought you were selling the old girl? Link to comment Share on other sites More sharing options...
coppertone Posted March 24, 2018 Share Posted March 24, 2018 Was going to but our youngest daughter wants it so I’m going to go through it with a fine tooth comb and make sure she is good. Audi love for life 2010 2.5GT limited is for sale. Link to comment Share on other sites More sharing options...
Scooby Fan Posted March 31, 2018 Share Posted March 31, 2018 re subbed Link to comment Share on other sites More sharing options...
Humble Rumble Posted April 2, 2018 Share Posted April 2, 2018 (edited) Bought the Prova blue glass for my JDM flip-tab rear view mirror. It's looking like the install is going to be easier than I thought thankfully. I can likely just leave the original USDM mount in place and affix the mount for the JDM mirror above it, since the USDM mirror's mount is more directly behind the mirror and that JDM mount is above the mirror. Edited April 2, 2018 by Humble Rumble 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
Humble Rumble Posted April 2, 2018 Share Posted April 2, 2018 More spending, updated my registration for 2019, and ordered vanity plates! Pretty satisfied with what I came up with for the plates. Under wraps until I get them. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
SpidermanMTL Posted April 9, 2018 Share Posted April 9, 2018 Powerstop Z26-1001 // 961 for my brembos (2011sti) the hawk hps pads squeal, and i'm fed up with them, i'm told the z26s are great for no squeal. MY BUILD TAKE 2 : http://legacygt.com/forums/showthread.php/spideys-12lgt-take-2-266018.html Link to comment Share on other sites More sharing options...
Falcor Posted April 9, 2018 Share Posted April 9, 2018 Powerstop Z26-1001 // 961 for my brembos (2011sti) the hawk hps pads squeal, and i'm fed up with them, i'm told the z26s are great for no squeal. I have heard a few here say the Hawk pads squeal. Are they more meant for track use? Link to comment Share on other sites More sharing options...
Humble Rumble Posted April 9, 2018 Share Posted April 9, 2018 My Hawk pads squeal like a mofo as well. Definitely going to be changing them this year. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
FLlegacy Posted April 9, 2018 Share Posted April 9, 2018 Ive had hawk hps pads on our tribeca for 80k miles or so with no squeal. Put some on the GT and so far no issues either. Link to comment Share on other sites More sharing options...
Humble Rumble Posted April 9, 2018 Share Posted April 9, 2018 Ive had hawk hps pads on our tribeca for 80k miles or so with no squeal. Put some on the GT and so far no issues either. I really think that comes down to climate now that I'm thinking about it. Mine are definitely louder at colder temps, and you being in Florida, that would make sense that you don't have much squeal. 2012 Legacy 3.6R Build Thread 5th Gen Legacy BM/BR Body Kit Compendium Thread Link to comment Share on other sites More sharing options...
FLlegacy Posted April 9, 2018 Share Posted April 9, 2018 I really think that comes down to climate now that I'm thinking about it. Mine are definitely louder at colder temps, and you being in Florida, that would make sense that you don't have much squeal. Did you leave off the OEM shims and apply the lube liberally to the backing plates. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now