TylerHartman's 1999 Legacy GT Wagon 5SPD

Been after an Old school Radio a bit.. (ideally alpine) and this fell in my lap for $14 at the wreckers, spent some time cleaning it up and ordered up an AI-Net to AUX converter for it. I'm in love, even does that 90's/00's Tilt

Another item long on my Wishlist was the Rare JDM Optional Cargo Fan, a Russian JDM parts dealer located this for me. The covers are the wrong shade and no wiring harness but I planned to fabric paint my interior carpet back there anyway so no biggy

started fab'ing a harness up (I/C Spray tank and Cargo fans)

Zero/Sports I/C shroud, going to try to open this up some more to fit the 08+ Style I/C better

been sanding on some goodies to get some stuff installed soon

Some Headlight Covers for the Morettes, but test fitted them to the OEM Projectors

Decided I needed to make work for myself Painted headliner and installed Fiber Optic lights

Painted Cargo Area, and Installed Cargo fans (mostly)

Tested a Little Patch on the carpet, and went well so the whole thing went. but here's a comparison

also, sound dampened the floor

Wow nice work

thanks

Radio in! with Aux Ai-Net cable

Red stitch Ebrake

Sourced BH black Grabs

Knocked up a extension for the Blinky Alarm light so I can get a I/C spray button for dash now

Bought an Alpine PWE-S8 Under seat, in prep I bought supplies. one was Tesa tape, it's amazing. Wrapped a bunch of stuff up under the dash

Also bought some new battery Terminals

Very special JDM package inbound this week

Well I bought a S401 BFM

Then started on making it work, first spent way too much time on making a Plug n Play adapter just for it to not work. Don't waste your time, flexible PCB's suck

so bought a pack of Tesa tape, yanked the dash and merged 3rd gen plugs in. turned out amazing and also put some outputs in for some stuff to come

started cutting plastic out next

I plan to fiberglass/Bondo an extension on the top of the shroud to fill the gap as the Audio guys do for speakers in time

no shroud installed at this time, but hopefully, I can mock it back in this week

Tesa tape is sick

Also as you probably have seen, I bought a Defi ZD ClubSport pack. this thing is amazing. gonna install the sensors this week

picked this up for the KM/H to MPH Conversion

Rad build!

Thanks

New Wheel! Black Momo BH5

Defi CR Boost

also got all the sensors going on the ZD

Replaced the compass for a Alpine Mini Disk player

found a 207 V8/V9 Long runner with most the hardware needed to install for a fair price

Snagged up a 207 V8/V9 Spec C Theromstatic oil cooler

V7 STI Power Steering cooler

IA Tuning speaker adapters

Skar Audio TX65C speaker install

My old cheap front kenwoods vs these

Tesa Taped the harness's

Hey! Been a bit since I've updated, just gonna go through it. a lot of this will be out of order

Installed the Fluidampr most recently, only had one short drive with it so far. but Very impressed with how it smoothed it out

Ordered a Vibrant 18x3 Resonator, Hoping this can solve my tinny raspy sounding exhaust, just hard finding people to do work with the Sickness going around now

Gauge pod from a M20tb with Defi CR boost, Defi CR Water temp, Defi CR Oil Temp

Rare OEM Center Console Power Inverter

Black OEM BH/BE Sun Visors

Mocked up Spec C Power Steering cooler (not plumbed in yet)

JDM option Tiger stripe mats

Zero/Sports plate frame

Ended up getting a hold of my Dream Greddy/Trust Lip for the JDM Bumper (it happened to come pre-painted white, so been running it, temp)

Here are a few pics of the lip with other grills etc I have

Here's the Prova hood lip I also bought

Prova grille

Hipposleek Grille

Nightpager Catch can/Washer tank

I decided to Test Fit my SYMS Skirts after I got the front lip... Holy crap it looks good

APS 70mm Cold Air intake, I love the ARC look. But Pod Filter Succ is amazing

APS 3" Inlet

Got some Esams Turn Signal Mirrors to retrofit on

I worked on running the wire and rear tweeters of my second TX65C Kit for the rear. Still haven't wired them in or hooked up speakers

These are going to be out of order but here it goes

Installed Slash Rotor Covers and Spline lug nuts

also have my hipposleek/zerosports grill in currently with syms skirts. but they still need paint

installed a Zero/Sports badge on the M20TB pod

Now here's the spice

Got a big order from a dealer in japan right before covid got EMS shutdown

Re wrapped my Spec C Long runner Intake wiring harness (deletes TGV Plugs)

Got my V8/V9 Long runner coated along with APS Parts

Figured you know with No car meets or anything wildy fun to do.. May as well tear this thing down and finally get it done.. so that's what happened

Found the correct tank and rubber hose for v8/v9 tank

Installed the TurboSmart EWG

Replaced all the hoses under the Intake for the most part along with new bolts etc.. Ended up being the right move, Half of the PCV hoses cracked upon removal

Installed GDT Cyl4 ReRoute

APS SR/40 (GT2876R) installed along with Mamba SS Line kit

size difference (TD04HL VS APS SR/40) it very clear how big this thing is from the top and back

Pretty much done now, Had to cut up the HKS pipe to make it fit with the APS 70MM intake, etc.. Lots of little stuff I didn't picture

here's the list of the new part

All new hoses/bolts, All fuel lines in bay redone with Gates hose good for every biofuel up to 225psi. etc..

EJ207 V8/V9 Long runner

APS SR/40 Turbo with Mamba SS Line kit

APS 3" inlet Pipe

APS 70mm Cai

TurboSmart 40mm Gate

ID1050X Injectors

GDT Cyl4 Reroute

Grimmspeed MAF delete

Grimmspeed EWG stopper

Grimmspeed 3Port EBCS

STI Silicone turbo inlet

130Amp Tribeca Alternator

spent alot of time fixing all the hoses, crusty bolts etc.. Straighten out the Fins on IC a little and finally have the correct 08-14 Bracket IC mount now too. There's a few things left to do, but overall very happy with how it's looking and will be glad to be done with this part of the build for a bit to focus on other things

93 tune + e85 (flex fuel Via ECF-1 into rear 02 sensor with Carberry rom)

Working on tuning it right now, will post up some videos at some point in future.

Did Motul Gear300 75w-90 in my Transmission and holy crap it made the world of difference, Doing Mazda RX8 oil Filter/5w-40 oil/V9 Spec C oil cooler here soon