srtlat Posted February 27, 2014 Share Posted February 27, 2014 I have a CEL going right now. I am trying to read the code with my reader and it just gives me a error. Went to the local parts store to have them read it as well to make sure it wasn't just my reader, but got the same message error. Already have reset the computer but the CEL comes back in about 2 days. Any ideas? Thanks Link to comment Share on other sites More sharing options...
srtlat Posted March 1, 2014 Author Share Posted March 1, 2014 Any help??????? Link to comment Share on other sites More sharing options...
AZP Installs Posted March 3, 2014 Share Posted March 3, 2014 I would suggest going to a dealer, they can check to make sure the ECU is still good using their computer. If that doesn't work you may have faulty wiring or more likely a bad ECU. -Mike Paisan http://www.pbase.com/paisan/image/153798190.jpg Maintaining, Modifying and Educating TriState Enthusiasts since 2001. Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs "Race Tested, Enthusiast Approved!" Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.