SPEC B interior to 05 detailed walkthrough.

- People who originally had tan seats have one extra step.

 

- For some reason the newer years just flipped the plugs on for the seatbelt receiver.. they are the same plug. They just put the halves on opposite sides.

 

- If you had tan seats. You'll want to just swap the plug from the tan to the black.

 

http://i.imgur.com/nxgeg40.jpg

nice job!

i appreciate peoples who take the time to make post like this .

- Time for the backrest.

 

- 1st, let me help you avoid a big mistake.. DO NOT pull the back cover off from the bottom. Pull from the top. You will break the clips if you pull from the bottom.

 

http://i.imgur.com/2plTWd8.jpg

 

http://i.imgur.com/1OIRVCV.jpg

 

http://i.imgur.com/MCsRILx.jpg

- Grab the Spec B backrest

 

- The hinge/motor assembly is attached with two bolts on each side.

 

- You will have to release the lower clips to be able to get access to the bolts.

 

http://i.imgur.com/7cVkUDU.jpg

 

http://i.imgur.com/nkPQrPj.jpg

 

http://i.imgur.com/1HEmDOG.jpg

 

http://i.imgur.com/zpjmKhj.jpg

 

http://i.imgur.com/PM4OHzJ.jpg

- Unclip the very bottom

 

 

http://i.imgur.com/TWUdgF6.jpg

 

 

- The power wire is ziptied to the hinge.

 

 

http://i.imgur.com/vKFzted.jpg

 

 

 

- Clip the tie, and remove the assembly. We won't be using this. Do what you wish with it.

 

 

http://i.imgur.com/vQd7lhG.jpg

- Grab your 05 seat.

 

- Same thing as with the previous seat. 4 bolts on each side.

 

 

http://i.imgur.com/e3AOkbK.jpg

 

http://i.imgur.com/S7WvZey.jpg

 

http://i.imgur.com/UQQuL1A.jpg

- the power cord on this seat is also ziptied to the hinge..

 

- remove these ties, and the whole assembly will come right out.

 

http://i.imgur.com/gNK0YZz.jpg

 

http://i.imgur.com/xcyYP5v.jpg

 

 

- Take this assembly and relocate it into the Spec B seat. It will bolt right in.

 

 

http://i.imgur.com/A4UISMw.jpg

 

 

- Pull the seat cover back over, and clip it back together.

 

 

 

http://i.imgur.com/uGB2CuF.jpg

- Put your seat back together.

 

- Use the plastics off your old 05 Seat.

 

- If you had tan seats before, you will have to source some black 05 plastics.

 

 

http://i.imgur.com/42jt2VT.jpg

 

http://i.imgur.com/SRICSu3.jpg

 

http://i.imgur.com/nXkH4oV.jpg

 

 

 

- It's ready for install now!!

 

 

http://i.imgur.com/kOLpApe.jpg

- Put your new Spec B interior in. It should plug right in, and not have any seatbelt, or airbag lights.

 

- YOU ARE DONE! CONGRATS!

 

 

http://i.imgur.com/9GNyicL.jpg

Thanks for having this! I did have a question. Are the 06 and 07 spec b seats the same in how the passenger seat has to be reconfigured to fit an 05 OBXT?

Man this is going to save me some serious angst...Thank you.

Are power seats special in any way compared to manual ones? They eigh more and can break. I just don't find myself concerned with adjusting my seat alot. I've never sat in a power seat so maybe the height adjustment might matter but, I've never felt too low or too high... My wagon has manual seats and I'm thinking of just keeping that for siplicities sake. Thoughts?

So I completed step 1 last night. Got the interior bits from an 07 spec.b to put in my 05 LGT wagon. This write up is for putting them in an OBXT, is it the same for LGT or is it more of a direct swap?