lee07 Posted March 8, 2012 Share Posted March 8, 2012 CEL light came on today and I stopped by autozone and it came up as p1312. Just had a tune done a couple a weeks ago along with the catless up and dp. Thought an tune would take care of it? Should I stop by my tuner and have him disable it or is this the egt sensor that the 2.2k resistor would take care of? Link to comment Share on other sites More sharing options...
Max Capacity Posted March 8, 2012 Share Posted March 8, 2012 I hope you have read what that code is for. sounds like the 2.2resistor is what you need. Didn't your Tuner delete/block that code ? 305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD). CHECK your oil, these cars use it. Engine Build - Click Here Link to comment Share on other sites More sharing options...
lee07 Posted March 8, 2012 Author Share Posted March 8, 2012 Just cleared the code and it's off for now. Hopefully forever but we'll see. Not sure if my tuner blocked the code but he said he can reflash it but it's already off. If it does come back, I'll have him reflash it. Link to comment Share on other sites More sharing options...
UTwrestler22 Posted November 5, 2012 Share Posted November 5, 2012 Is this the sensor on the stock UP? If so is there a walkthrough for the 2.2k ohm resistor mod? Link to comment Share on other sites More sharing options...
Max Capacity Posted November 6, 2012 Share Posted November 6, 2012 Radio Shack sells a package of 5 for $1.25, stick one the gray connector on the passenger shock tower and be done with it. 305,600miles 5/2012 ej257 short block, 8/2011 installed VF52 turbo, @20.8psi, 280whp, 300ftlbs. (SOLD). CHECK your oil, these cars use it. Engine Build - Click Here Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.