Logibear117 Posted July 13, 2018 Share Posted July 13, 2018 Is an 04 Momo wheel (red arrow) swap into a 98 plug and play, or does it take some work? I’ve read about wiring being different between the 02 and 03 momo’s. But I haven’t seen anything on 04 momo’s in a leggy, only in fozzy’s Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Setnev Posted July 13, 2018 Share Posted July 13, 2018 Physically, it will fit. Most all Subaru's are the same spindle size. Other than that, likely issues are modification required to the clockspring, airbag incompatible with your system (in fact I believe the 98 is the last year of first generation airbags), and loss of cruise control and/or horn. Link to comment Share on other sites More sharing options...
Logibear117 Posted July 18, 2018 Author Share Posted July 18, 2018 Thanks for the knowledge! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
The Yeti71 Posted July 18, 2018 Share Posted July 18, 2018 I had a '97 Outback and installed a Momo from a '02 WRX. If memory serves, the ONLY modification was the connector for the airbag (or something like that). I believe it was swapping the connector. Once done, it literally was plug and play. No loss of cruise, signal, etc, and no dash light issues. Anyway, for what it is worth... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.