bolts Posted October 15, 2018 Share Posted October 15, 2018 Ok so I'm looking or the best option for top plates for my outback XT 2005. Anyone have any experience with monroe, KYB or any other aftermarket brands? I've heard mention that monroes are beefier than the oems but can't find any more feedback. Any feedback would be greatly appreciated. Thanks Link to comment Share on other sites More sharing options...
bdcvg Posted October 17, 2018 Share Posted October 17, 2018 Everything I read led Me to the Moogs. The swaybar endlinks are the best ever and I have used Moog stuff in other cars with no issues. I only have 500 miles on all 4 hats but they seem great so far. The bearings in the front were nice and tight and there was very little play around the strut top. Link to comment Share on other sites More sharing options...
08SpecB_DE Posted October 19, 2018 Share Posted October 19, 2018 Ive used Moog and Monroe hundreds of times on various applications. I'd say they are about the same quality. I used Monroe mounts in the rear of my car and have not had any problems. I'd go oem for the front for quality purposes. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.