fs - location: InfosecDad's feeble attempt at making room in his garage

I'll have more coming, this is just what I have pictures of at the moment.

 

Prodrive P1 17x7 ET52 by OZ Racing - $600 + shipping

Pretty rare, in really good condition.

I have two center caps, two have broke from fatigued plastic.

The Michelin AS-3 tires are low tread.

I'm still kinda fighting myself about letting these go, but if someone wants them speak up.

If I end up buying an outback for the family, I might use these on it.

 

 

 

 

 

 

 

1320 ELH (Equal length headers). - $250 + shipping SOLD

I ran these for approximately 1k miles

I picked them up from 1320 Performance as they had to patch a failed EGT install.

They ran great, you have to pull them a bit to install (which is fairly common in my experience).

I just decided to go back to the stock manifold.

 

 

 

 

JDM Bilstein Spec B Rev. B suspension - $400 + shipping SOLD

This set has around 50k miles I think, I've ran them for 3 years.

They are a wonderful balance of comfort and handling.

I just decided to try Konis and trade some comfort for handling.

No leaking or clunking and seem to be in good shape to run for a while yet.

More info about the Spec B Rev B here: https://legacygt.com/forums/showthread.php/faq-jdm-oem-suspension-61108.html

 

 

 

 

GFB BPV/BOV Fully adjustable - $150 + shipping SOLD

I like that you can adjust from full recirc to full bov and anywhere inbetween.

Nothing wrong with it that I know of, just replaced with a Synapsis DV to test.

I did level the flange as it was slightly out of square.

I either use the permatex 1 min gasket or felpro gasket material cut to size when installing.

 

 

 

HKS Inlet w/ panel filter - $150 + shipping

I ran this for a couple years before switching to a Perrin so I could use a GS intake.

Unique piece that includes the S-curve built in.

Works really well with the stock intake setup, most aftermarket won't work because they eliminate the S-curve part.

The connector to the turbo is still relatively soft, but is harder than when I first installed it.

It was sealing fine when I pulled it, just didn't want someone to be surprised

I used one of the double beaded clamps, and would recommend doing the same as that's the shape pressed in the coupler now :-D

The panel filter is included, it's just not in the picture.

 

Edited December 15, 2020 by Infosecdad

jdm tophats included in the b suspension package?

jdm tophats included in the b suspension package?

 

Yes sir, that's the way I bought and ran them.

GFB Sold.

Bump

JDM spec.B suspension still available?

JDM spec.B suspension still available?

 

Yes, still available at the moment.

Those butt spacers available to be sold separately?

Those butt spacers available to be sold separately?

 

Sure, I believe these are 3/8"

 

$20 mailed if you are interested.

PM sent

Saggy spacers sold...

Man this is going slower than I thought it would. Those ELH keep lookin at me.

i have 2 sets on the shelf. what's another set?

The headers and intake are calling me....I shouldn't buy more stuff that doesn't help me fix the broken stuff

hoarders.

hoarders.

 

Hey! I resemble that remark. :-;

Same

Bump because I’m finally getting out of isolation for COVID and can actually box and ship now.

Pmd about shocks.

PM sent about Bilstein set up, if still available.