Rhitter Posted July 20, 2021 Share Posted July 20, 2021 (edited) Buyer pays shipping. keep in mind these are large / heavy parts and shipping is expensive. Local pick-up available. DAMD D shape wheel SOLD - works with 08+ Legacy / OBXT steering wheels with controls. SS358D. GS TMIC for Legacy GT: SOLD. All parts included. about 15k miles on it GS Catted / coated limited downpipe: $ SOLD . About 40k miles on it. Tomei Equal Length headers + Tomei up-pipe: $350. Unsure how to ship these. They don't really fit in normal size boxes. Unsure mileage. Bought used off of these boards. JDM projectors: SOLD. These were built by UTC_Pyro. These don't fit 08+ headlights (it's too deep). It should, but I cannot verify fit in 05-07. King springs (KSRL-29) SOLD. Despite the listing these fit my 2008 Outback on Legacy GT Bilsteins just fine. These are 1 inch lowering springs. The are progressive and great if you regularly carry people+ gear. STI Pinks - Legacy GT wagon springs SOLD . Front two white dots (ST2033021000 ) rear two blue dots - wagon specific (ST2038021020) Edited February 15, 2022 by Rhitter My OBXT build Link to comment Share on other sites More sharing options...
Marvick08GT Posted July 20, 2021 Share Posted July 20, 2021 Let me know if you split the springs, only need the rears! GLWS! (Love the wheel!) Link to comment Share on other sites More sharing options...
seanyb505 Posted July 21, 2021 Share Posted July 21, 2021 Yeah the want for the wheel runs deep. Wrong timing in life for me, but glws Link to comment Share on other sites More sharing options...
Rhitter Posted July 21, 2021 Author Share Posted July 21, 2021 Let me know if you split the springs, only need the rears! GLWS! (Love the wheel!) Buy the King springs. They pair well with the STI fronts. That's how I mostly ran them and why I bought them. STI were good. But couldn't handle 4 people 2 dogs and a roof box full of stuff (and a bike). Because the kings are progressive they handled that range pretty well. My OBXT build Link to comment Share on other sites More sharing options...
xt2005bonbon Posted July 21, 2021 Share Posted July 21, 2021 Going back to stock and selling the car? Link to comment Share on other sites More sharing options...
gvr41520 Posted July 21, 2021 Share Posted July 21, 2021 Will those King springs work on an 05 LGT 5EAT wagon with Bilstein RevA struts? I'm running Wangan springs now, thinking of changing it up. Sent from my HD1925 using Tapatalk Link to comment Share on other sites More sharing options...
shralp Posted July 21, 2021 Share Posted July 21, 2021 Nice parts, those pinks are getting harder to find these days! What is the diameter of your DAMD, any issues interfacing with an '05? Condition? Looks to be in pretty good nick. Link to comment Share on other sites More sharing options...
boxkita Posted July 21, 2021 Share Posted July 21, 2021 damd wheel? wish i bought one when it was a thing. Build my car Boxkita Track days Link to comment Share on other sites More sharing options...
xt2005bonbon Posted July 21, 2021 Share Posted July 21, 2021 (edited) These are still a thing . I love mine. https://www.kamispeed.com/collections/damd You do have to preorder though. Edited July 21, 2021 by xt2005bonbon Link to comment Share on other sites More sharing options...
Rhitter Posted July 21, 2021 Author Share Posted July 21, 2021 (edited) Going back to stock and selling the car? These are parts I have had off the car for awhile. After my last smog didn't want to put them back on and went back to a stock set-up. Yeah - goal is to sell my car, but I am balancing it with how much effort I want to put into removing what's on there (there is still a bunch!) Will those King springs work on an 05 LGT 5EAT wagon with Bilstein RevA struts? I'm running Wangan springs now, thinking of changing it up. Yep, these springs will work on any Legacy GT strut. I had them on USDM Bilstein's (I have the KSRS-29 on now also on USDM Bilstein's) Nice parts, those pinks are getting harder to find these days! What is the diameter of your DAMD, any issues interfacing with an '05? Condition? Looks to be in pretty good nick. Condition is great. I don't see any noticeable areas of wear. I am unsure of fitment on anything beyond 08/09s. It's an SS358D. This wheel integrates with the OEM audio controls and I think the 05-07s fit differently. It took me a little while to get used to the D shape. But, this is probably one of my number one mods for this car. It's unreal the better difference it makes. It's just so much nicer to hold and "fits" the car better. This is on OEM wheels - Bilstein's on Pinks front. KSRL-29+.5 inch spacer (I like rake) as an idea for their height. Outback's seem to sit lower than Legacy GTs and normally need an additional spacer. Edited July 21, 2021 by Rhitter My OBXT build Link to comment Share on other sites More sharing options...
gvr41520 Posted July 21, 2021 Share Posted July 21, 2021 pm'd re: Kings Sent from my HD1925 using Tapatalk Link to comment Share on other sites More sharing options...
Infosecdad Posted July 21, 2021 Share Posted July 21, 2021 Let me know if you split the springs, only need the rears! GLWS! (Love the wheel!) What if I was interested in the STi fronts with the kings for the rear, would that work? Link to comment Share on other sites More sharing options...
JoeInOregon Posted July 25, 2021 Share Posted July 25, 2021 Any wiggle room on the downpipe ? I'm afraid after shipping to 97701 ( Oregon ) would make it about the same price as new Sent from my Pixel 3a using Tapatalk Link to comment Share on other sites More sharing options...
boxkita Posted July 29, 2021 Share Posted July 29, 2021 Any wiggle room on the downpipe ? I'm afraid after shipping to 97701 ( Oregon ) would make it about the same price as new Sent from my Pixel 3a using Tapatalk you could road trip down and back for less money Build my car Boxkita Track days Link to comment Share on other sites More sharing options...
Rhitter Posted July 30, 2021 Author Share Posted July 30, 2021 (edited) Any wiggle room on the downpipe ? I'm afraid after shipping to 97701 ( Oregon ) would make it about the same price as new Sent from my Pixel 3a using Tapatalk Shipping is $60. This is the limited / coated / catted version of their downpipe which is over 1k new. It's also unavailable (like most things in the pandemic) Edited August 2, 2021 by Rhitter My OBXT build Link to comment Share on other sites More sharing options...
Zac88 Posted July 30, 2021 Share Posted July 30, 2021 Ship to STi pinks to Canada? Link to comment Share on other sites More sharing options...
Rhitter Posted July 30, 2021 Author Share Posted July 30, 2021 STI Pinks and the downpipe are sold. My OBXT build Link to comment Share on other sites More sharing options...
JoeInOregon Posted August 1, 2021 Share Posted August 1, 2021 Shipping is $60. This is the limited / coated / catted version of their downpipe which is over 1000k new. It's also unavailable (like most things in the pandemic)My bad I didn't realize , and missed out [emoji50] Sent from my Pixel 3a using Tapatalk Link to comment Share on other sites More sharing options...
Rhitter Posted August 2, 2021 Author Share Posted August 2, 2021 I have actually been a little bit surprised at how reasonable shipping has been for these larger items. I thought for sure it would be prohibitively expensive. Headers, steering wheel, and JDM HIDs left My OBXT build Link to comment Share on other sites More sharing options...
Infosecdad Posted August 13, 2021 Share Posted August 13, 2021 STI Pinks and the downpipe are sold. Got the pinks installed, love them, thanks! Link to comment Share on other sites More sharing options...
Febreze Mee Posted January 29, 2022 Share Posted January 29, 2022 Bump for anyone with a post-face looking for a DAMD wheel. I sure have been! MILKRUN - Click Here Link to comment Share on other sites More sharing options...
Rhitter Posted January 30, 2022 Author Share Posted January 30, 2022 It's still available for anyone looking. I have the headers also. My OBXT build Link to comment Share on other sites More sharing options...
moddingbug Posted January 31, 2022 Share Posted January 31, 2022 PM sent! I'm in San Jose Link to comment Share on other sites More sharing options...
BoozeRS05 Posted February 5, 2022 Share Posted February 5, 2022 I want the header, but idk how much shipping would come to moving it across the continent. EB's Subaru journal - 2005 LegacyGT Wagon & 2014 Forester FB25 (2008 specB - RIP) IG@legacygtliving Link to comment Share on other sites More sharing options...
Rhitter Posted February 10, 2022 Author Share Posted February 10, 2022 DAMD D shape wheel still available and lowered the price to $300 + shipping. This was one of the best upgrades I made to my Outback. My OBXT build Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now