09 H/K System Help

Replaced my head unit with a Joying 1024x600 unit. Have it all installed but I'm at a loss for the what these remaining cords are. My suspicion is that they are for the line in and the amp / sub / back speakers. So my question is what is the best way to wire that into my new stereo.

2009 Legacy 2.5i Special Edition 4AT

Harmon Kardon Audio

Radio Model: 86201AG72A

http://s7.postimg.org/m7whn22ff/unnamed.jpg

New Stereo:

http://s15.postimg.org/yl2fl43ob/unnamed_1.png

I can't see what color all the wires are, but maybe aux input?

*Actually I completely misread the diagram below. I think that might be the i85 connector though.

Thanks apexi I think you are right. Now I need to figure out how I missed the hooks up for the H/K amp.

Sent from my SM-G935V using Tapatalk

the black wire on the left side of the pic looks like a ground.

Here's info on the i85:

http://ae64.com/Legacy_Gen4_HU_Transplant.htm

http://ae64.com/i85_transplant_harness.htm

more good info (source):

2009 Models with harman/kardon

If your car is a 2009 with the OEM harman/kardon amplifier and speaker system, see this post.

Most 2009 owners have connected their aftermarket HU's speaker outs to the h/k amp without any problem. If you would prefer to send your HU's line outs to the h/k amp, you'll have to add male RCA plugs to the 14-pin harness — nobody currently makes a version with RCA plugs.

The 2009 h/k amp is triggered from the car's +12V Accessory power (on whenever you turn on your key). There is no amp remote trigger lead on any of the 2009 OEM HU's harnesses.

Thanks for the help, much appreciated

Sent from my SM-G935V using Tapatalk