Thread: ej22t build.
View Single Post
#11: 01-20-2013, 06:31 PM
XxKylexX's Avatar
Title: Junior Member
Location: Puyallup
Car: 99 legacy wagon 30th Anv
Posts: 57
iTrader: (0)
Send a private message to XxKylexX Find all posts by XxKylexX Reply With Quote
Originally Posted by monkeyposeur View Post
If you use the stock ECU you can upgrade to a TD04 and TMIC with no problems. I would recommend installing a Walbro 255 and get the injectors cleaned and flow tested. Was the 22T from an auto or 5MT? You will want replace the ignition coil with a Diamond coil if it was from an auto as well as run a ground from the ecu so it knows you have swapped in a manual.

Do you have the MAF, the EBC, MAP, and the BCS from the 22T?

You can get a lot of power with the stock internals and meet your power goals. How many miles are on the 22T?

172k on the motor. the motor has everything. if i had a car to put it straight into i could and it'd run fine. has good compression. i do belive it was auto. i was looking up td04's (i know im getting ahead of myself). i might beef up the injectors to play on the safe side....? good idea?