View Single Post
#5: 01-13-2013, 04:46 AM
Title: Contributing V.P.
Location: Milwaukee
Car: 99 Legacy 2.5GT Toyota Supra 2jz/R154
Posts: 1,048
iTrader: (0)
Send a private message to spooln30 Find all posts by spooln30 Reply With Quote
Just buy a set of new KYB struts and I'm willing to bet you'll need the strut mounts as well. If your having suspension noise when driving over a bumpy road it would most likely be a strut mount but sway bar end links, SB bushings and balljoints should also be considered for the noise. That's being said check your suspension all around for any parts that show wear. The sway bar bushings and end links should be checked with the full weight of the car on the tires, meaning it still can be in the air but it would have to be on a set of drive on ramps or maybe some cinder blocks. The reason for checking those parts out like this is when you have your car jacked up and on stands the suspension is at full drop and it will be pulling down on the sway bar and its harder to tell if the bushings or end links are worn. GL.
The Following User Says Thank You to spooln30 For This Useful Post:
jojito (01-13-2013)