The Grey Goose

That was the plan! Either find an STI y pipe and extend it or find a WRX mid pipe and weld the end onto my stock y pipe. No way I’m running without a resonator.

Installed the drivers side OEM WRX muffler. Had to trim some plastic with a fresh razor blade but other than that, it bolted up fine. I did have to heat up the hangers on the muffler with a torch and tweak them to get it to fit center, albeit a hair crooked. I'm fine with that though. Has a nice little rumble to it now. I have the passenger side muffler too, so now to keep an eye out for a WRX mid pipe. I have a welder so modifying that will be easy.

Not to mention that is a very narrow tire to be running on that wide of a wheel. You'll have a real stretched look going on there. I'm running 245s on my 8.5" wide wheel, and it looks great.

Without looking into it, I'd imagine it would be super simple. Just unscrew the grocery hooks in the trunk, pull back the liner, and undo some bolts.

From what I understand, they are not plug and play. There are 4 wires that you need to run. Pretty sure Andrew_ls did the install himself as he's a DIY kinda guy.

http://legacygt.com/forums/showthread.php/factory-stereo-upgrade-260768.html

Noooo. The key is to do thin coats so it doesn't run. I used an entire can and did 4 or 5 coats, and I wish I would have gotten a second can and done a few more.

Eh, taking the bumper off is so easy anyways, and makes everything else super easy to install.

https://www.smyperformance.com/jdm-subaru-sports-grill-2015-legacy-outback.html Here's the only place I know of state side that sells them. Saves you a ton on shipping from Japan.

I'd highly recommend getting the Morimoto fogs then (or a similar LED fog with complete housing). $170 through Amazon and their output is awesome. Running HIDs in the fogs would likely be too hot and the output similar to what you have now. https://www.amazon.com/Morimoto-Type-LED-Projector-Light/dp/B00XA3C2FA/ref=sr_1_fkmr0_1?ie=UTF8&qid=1494805712&sr=8-1-fkmr0&keywords=morimoto+type+t+dogs

My guess is they'd be too hot. Are you running LED bulbs in OEM housings or a full LED housing like the morimotos?

So far the only one I really like is the stock WRX exhaust with our resonator welded on. It's a really nice medium between stock and the typical Subaru grumble.

No, you will rub. You can look at the first page and see this info on the chart.

Whooops. Thought this was "what have you done to your 6th gen today". Got my threads mixed up.

I got in some overlays from emblemoverlays.com today. Where's the pictures you ask? Well, I didn't realize that the front and rear emblems are different sizes. Just never crossed my mind, and at a glance, both overlays looked the same size. I start putting one on the rear only to notice it's too big. No big deal, they sent the wrong size and I'll just trim up the edges with a razor. Go to the front emblem, and realize the overlay is way too small for the front. Ended up ruining everything, and was pretty salty I just pissed away $22. I ordered another set from a different vendor so hopefully that goes smoother.