knfevg

Guy, no one can help me with my problem?

I tried today several things: ECUFlash 1.42 ECUFlash 1.29a With shorting the pins of the white terminal without shorting the pins clicking OK after switching the key to ON Clicking OK BEFORE switching the key to ON Here are the results: 1.29a DIDNT WORK AT ALL. Here is the error I got: [01:12:01.640] Version 1.29.906 [01:12:01.656] 8 memory models read. [01:12:02.921] 140 ROM metadata models read. [01:12:02.921] checksum module "subarudbw" loaded. [01:12:02.921] flashing tool "wrx02" loaded. [01:12:02.921] flashing tool "wrx04" loaded. [01:12:02.921] flashing tool "sti04" loaded. [01:12:02.921] flashing tool "sti05" loaded. [01:12:02.921] flashing tool "mitsukernel" loaded. [01:12:02.921] flashing tool "mitsukernelocp" loaded. [01:12:02.921] flashing tool "mitsubootloader" loaded. [01:12:07.312] unable to open OpenPort device [ Serial ]. [01:12:07.312] unable to connect to vehicle interface. With version 1.42 more luck. When I choose 2003-2005 NONUSDM, I get this error: [12:40:59.718] Using interface USB <-> Serial [12:41:01.875] denso02_bootloader_cmd_start [12:41:03.109] denso02_bootloader_cmd_start [12:41:04.343] denso02_bootloader_cmd_start [12:41:05.578] denso02_bootloader_cmd_start [12:41:06.812] denso02_bootloader_cmd_start [12:41:07.250] kernel get version [12:41:07.578] interface close [12:41:07.578] interface close When I choose 2004-2005 USDM WRX, here is what I get: [12:40:48.875] Using interface USB <-> Serial [12:40:50.000] kernel get version [12:40:50.390] SSM2 init [12:40:50.546] SSM2 ECU ID is 29 44 59 61 05 [12:40:52.578] interface close [12:40:52.578] interface close The white block has no effect at all. Any ideas? I have the ProDrive kit (including ECU flash). I know that some have a problem reading it. What error should I get if it's locked?

Just got back to trying this. Two questions: 1. Do I need this plug just to READ the ECU? I'm not trying to flash yet, just reading... 2. Any way I can make this plug in DIY method?

I've got a EDM Impreza STi 2003 with ProDrive kit (including a new map). Using the VagCom cable I managed to datalog with RR, EcuExplorer and LearningView. Now I want to READ ONLY the current map (not writting yet). For this I've connected the green plug under the steering wheel, connected the USB to the computer and turned the key to ON. The yellow engine light was flashing and the pump was switching on and off. But, ECU FLASH couldn't read the ECU. I'm working with the latest ECUFLASH version. Any ideas?