Subaru Legacy Forums

Subaru Legacy Forums (https://legacygt.com/forums/index.php)
-   Legacy Photos (2005-2009) (https://legacygt.com/forums/forumdisplay.php?f=16)
-   -   MooKz LGT (https://legacygt.com/forums/showthread.php?t=195767)

MooKz 11-03-2012 01:45 AM

MooKz LGT
 
Since I have decided that I have picture-whored a lot over the past couple weeks, I figured I would go ahead and start putting the pictures and updates here in this thread. Enjoy

Mustang Dyno Numbers on 93 Pump Gas
300whp
346wtq

Modifications include;
Engine:
Built EJ257 Shortblock
  • CP Forged Pistons (8:2 / 99.5mm)
  • Manley H Beam Connecting Rods
  • Nitrided STi Crankshaft
  • ACL Race R&M Bearings
  • ARP Studs & Bolts
  • 12mm Oil Pump
VF43 STi Turbo
Grimmspeed 3 Port Boost Solenoid
Grimmspeed Coated 38mm EWG Up-pipe Dumped
Grimmspeed Coated Crosspipe
Grimmspeed Air/Oil Separator
Invidia 3" Bellmouth Downpipe
Custom 3" Single Exit Exhaust
Custom 76mm Cold Air Intake
Perrin Turbo Inlet
FP Braided AVCS Oil Feed Line
Fast Motorsports FMIC
GFB 50/50 BOV
Walbro 255 LPH Fuel Pump
Deatschwerks 850cc Injectors
NGK Iridium One Step Colder Plugs
Gates Racing Timing Kit

Exterior:
Plastidipped Lower Grille and Fogs
Plastidipped DIY Grille
Black and Cleared Headlights
Hella Supertones White
DIY Red Tail Lights (Done on today, 11/02/2012)

Wheels/Suspension:
Varrstoen ES111 18x9.5 +34
BC Coilovers
Whiteline Camber Bushings
Whiteline Front and Rear Endlinks
Whiteline Anti-Lift Bushings
Whiteline Control Arm Bushings

Drivetrain:
Spec Stage 2+ Clutch Kit
Cobb Double Adjustment Short Shifter
Cobb Rear Stay Bushings
Cobb Linkage Bushings

Pictures:
When I first got her in February of 2011
http://i1299.photobucket.com/albums/..._4167874_n.jpg

When I cleared and Blacked out the headlights
http://i1299.photobucket.com/albums/..._1405351_n.jpg

With my first set of wheels and lowering springs
http://i1299.photobucket.com/albums/...13455558_n.jpg

On BC Coilovers
http://i1299.photobucket.com/albums/...32255844_n.jpg

Sold the wheels and springs and got a couple new suspension goodies. :spin:

Now, on to the current set-up:
http://i1299.photobucket.com/albums/...ryLakeEdit.jpg
http://i1299.photobucket.com/albums/.../029edited.jpg
http://i1299.photobucket.com/albums/...037edited2.jpg
http://i1299.photobucket.com/albums/.../054edited.jpg
http://i1299.photobucket.com/albums/...dgeport4-1.jpg
http://i1299.photobucket.com/albums/.../006edited.jpg
http://i1299.photobucket.com/albums/...idgeport-1.jpg

Arielgt93 11-03-2012 07:20 AM

Woah! Looks so amazing! I love the wheels and super super clean! Engine bay pics please.

laff79 11-03-2012 07:45 AM

nice work. love the wheels. a little too slammed for my taste, but your go mods make up for it!

Hepy117 11-03-2012 08:04 AM

PA plates? Where in PA? I see your profile says MD

slim101 11-03-2012 08:43 AM

car looks sick as always.

dspurgin22 11-03-2012 09:04 AM

Amazing! Love the rims!

cheerio 11-03-2012 09:26 AM

Tire size? U look like my twin!

No DRFT 11-03-2012 11:32 AM

Sunset pic is cool

MooKz 11-03-2012 12:27 PM

Quote:

Originally Posted by Arielgt93 (Post 4142306)
Woah! Looks so amazing! I love the wheels and super super clean! Engine bay pics please.

Thanks! I'll put some up once my intercooler pipes are presentable. I'm having them powdercoated white.

Quote:

Originally Posted by Hepy117 (Post 4142346)
PA plates? Where in PA? I see your profile says MD

I live in Maryland, but have yet to change the plates over. I am this week though.

Quote:

Originally Posted by cheerio (Post 4142425)
Tire size? U look like my twin!

215/40/18

Quote:

Originally Posted by No DRFT (Post 4142560)
Sunset pic is cool

Thanks. It actually started off as an overcast picture but I added some lighting and such with Photoshop CS4.

legacy360 11-03-2012 12:42 PM

Car looks amazing, glad to see you have a functioning built block. ;)

funkycharms 11-03-2012 01:11 PM

Sexy! My favorite is the white and gold combo

Sent from my SPH-D710 using Tapatalk 2

MooKz 11-03-2012 01:17 PM

Quote:

Originally Posted by legacy360 (Post 4142631)
Car looks amazing, glad to see you have a functioning built block. ;)

Been running it since March of this year and everything is still 100%

I hope to build the heads finally this winter and stab at my build finally. I'm looking into meth injection and a precision 6262 or 65 to get me 500whp with supporting fuel and other mods of course. I'll have a spare motor just in case. :lol:

MooKz 11-03-2012 01:18 PM

Going out to take more pictures right now for your viewing pleasures.

Arielgt93 11-03-2012 02:34 PM

Damn the inter cooler pipes are going to make your engine bay really pop out can't wait to see it! And where in Maryland btw? Because sometimes I pass by their with my legacy gt.

Eye4nEye 11-03-2012 02:55 PM

That is one very nice and well thought out lgt!

lieutenantcolumbo 11-03-2012 03:05 PM

Very sharp! Glad to see you got your motor all sorted out.

MooKz 11-03-2012 03:17 PM

Quote:

Originally Posted by Arielgt93 (Post 4142747)
Damn the inter cooler pipes are going to make your engine bay really pop out can't wait to see it! And where in Maryland btw? Because sometimes I pass by their with my legacy gt.

Patuxent River. Yeah I can't wait to have them powder coated.

MooKz 11-03-2012 07:10 PM

Here are some more pictures guys!
http://i1299.photobucket.com/albums/...ked/Bridge.jpg
http://i1299.photobucket.com/albums/...TheLight-2.jpg
http://i1299.photobucket.com/albums/...d/Tracks-1.jpg
http://i1299.photobucket.com/albums/...ed/CarWash.jpg
http://i1299.photobucket.com/albums/...d/CarWash2.jpg

Arielgt93 11-03-2012 09:19 PM

Omgosh man!!!!!! This car just look so damn sexy! I can't wait when mine looks as this good!

MooKz 11-03-2012 09:27 PM

Thanks man.

Arielgt93 11-03-2012 09:32 PM

No problem man! Really keep the pics coming cause this car is really looking amazing and how is the single cut exhaust? I've been thinking of doing that.

mdzowner 11-03-2012 09:44 PM

awesome those drags sold fast. i was gonna scoop them up.

MooKz 11-03-2012 10:07 PM

Quote:

Originally Posted by Arielgt93 (Post 4143267)
No problem man! Really keep the pics coming cause this car is really looking amazing and how is the single cut exhaust? I've been thinking of doing that.

It's deep, and really loud. I'd recommend it to anyone. :cool:

Quote:

Originally Posted by mdzowner (Post 4143282)
awesome those drags sold fast. i was gonna scoop them up.

They did. I actually made the sale while driving one night because this guy really liked em. Sold em on the spot. (Well once we went and got my stock wheels on of course.

Arielgt93 11-04-2012 04:38 AM

Yeah I really want to do it! Maybe when I get some money ill do it. And you have any videos of your car?

boostedyota90 11-04-2012 02:08 PM

Car looks awsome man, very clean. What bulbs are those for your fog lights?

MooKz 11-04-2012 02:25 PM

Quote:

Originally Posted by Arielgt93 (Post 4143487)
Yeah I really want to do it! Maybe when I get some money ill do it. And you have any videos of your car?

I'll take one today.

Quote:

Originally Posted by boostedyota90 (Post 4143995)
Car looks awsome man, very clean. What bulbs are those for your fog lights?

I took my fogs out.

Haight 05LGT 11-04-2012 02:38 PM

Engine bay pics?

MooKz 11-04-2012 02:40 PM

Wait until my pipes are powder coated :spin:

Haight 05LGT 11-04-2012 02:54 PM

Quote:

Originally Posted by MooKz (Post 4144021)
Wait until my pipes are powder coated :spin:

NO!:mad:

MooKz 11-04-2012 03:30 PM

You only have to wait until tonight :) I'm hoping to also powder my accessory pumps.

Haight 05LGT 11-04-2012 03:41 PM

Quote:

Originally Posted by MooKz (Post 4144044)
You only have to wait until tonight :) I'm hoping to also powder my accessory pumps.

Oh ok awesome. That would be cool. Maybe a first?

Arielgt93 11-04-2012 08:00 PM

I can't wait to hear how your legacy sounds!

MooKz 11-04-2012 08:22 PM

Okay guys, I didn't get a video and nor did I get my stuff powdercoated. I ended up working on a bugeye so we could get it running. However, when I get back in MD tomorrow, I'm going to take the video. I'll temporarily paint the pipes when I do my clutch job this week. (Clutch started slipping tonight.) :(

Arielgt93 11-04-2012 08:39 PM

damn its okay no problem ill wait for this because yours looks amazing! imagine how it sounds :D lol but i get you i remember my legacy gt was down for 3 months blown timing went bad and one of cylinder heads went horrible the dealer i got it from did not what they were doing and did everything so wrong but ever since i got it i had to replace a lot sensors and new turbo wanted to go aftermarket but didn't have the money at the time :/ but hopefully you get it running soon good luck! can't wait :D

MooKz 11-04-2012 08:41 PM

Well my car now needs a new clutch but we got his car running this evening. He's got a bad injector so its causing knock so we had to go pick up a new set of injectors so he can put those in tomorrow.

MooKz 11-04-2012 08:42 PM

Clutch job takes me 3 hours or less depending on how much I jerk around. :lol:

Arielgt93 11-04-2012 08:48 PM

haha we all jerk around when we do our repairs or add ons lol i know I'm going to when i finally get my fms fmic :)

MooKz 11-04-2012 08:54 PM

These FMIC are a tight fitment man. Lot's of leaks if not sat in the couplers right. Ask me how I know. But I'm just going to temporarily paint it then the time comes this week.

compsurge 11-04-2012 09:26 PM

When are you doing clutch? Mine slipped for about 5k before I swapped it out and I could have babied it for another 10k most likely.

MooKz 11-04-2012 09:29 PM

This week when it arrives.


All times are GMT -6. The time now is 06:01 PM.



vBulletin Optimisation provided by vB Optimise v2.6.3 (Lite) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
LegacyGT.com