ridemore

This is admittedly a noob problem. I recently replaced a failing 05 OXT turbo with a near stock aftermarket model w/ new oil lines, etc. (I seemed to have caught the turbo failure early and immediately shut the engine down. The banjo bolt filter was partially blocked, which seems to have caused the turbo bearing to fail. Fortunately, no housing or impeller damage. Just the ever so slightest bit of play in the shaft.) I also took off the intake assembly to replace leaking fuel line hoses. (Common problem on the 05 OXT.) I had to defer reassembly for a long time due to job/life issues. Upon reassembly (finally) and startup, engine starts, but idles so rough it stalls. Engine will rev, but doesn't sound right. Oddly, it gives no CEL and is issuing no trouble codes. So, I must have missed reconnecting a sensor or other connector, but I haven't been able to find which one it is. Does this sound familiar to anyone?