WRX USA
-
Posts
1,527 -
Joined
-
Days Won
3
3 Followers
WRX USA's Achievements
-
It’s that power connection that goes inline with the existing stereo harness that was hacked. Thankfully, he took his time and disconnected all of the sensors so I have mine hooked up and working except the illumination.
-
Do you have the wiring on the gauge pod? The one I purchased had the plug-and-play harness cut and I’ve never been able to get the lighting to work right.
-
That is what Dolby Pro Logic does. The issue is that there is content recorded in 5.1 (Left, Center, Right, Surround Left, Surround Right, Subwoofer/Low Frequency Effects) but there is no way to play it back through the system so the only content you can play is 2 channel stereo. Proper imaging from 2 speakers should produce a “phantom center channel” so I just don’t get the need.
-
Is there a Dolby Pro Logic processor somewhere in the mix? I don’t get what comes through the center channel.
-
Pretty sure that’s only a JDM “Tuned by STi”/S402 OEM part because the rear suspension is completely different than Impreza. -
What about 2004 WRX STi? It has 5x100 pattern and the rotors have to be at least as big, most likely bigger.
-
I’ve seen people rationalizing paying a little more and getting a Rivian R1T too.
-
$65k for a 2024 Tacoma TRD Pro is a lot. I’m hoping it helps keep the third gen prices up since I have a 2020.
-
Sedan (and wagon) version available here: https://www.japanparts.com/parts/detail/?id=3074 Wagon version available here: https://avojdm.com/side-rain-visor-set-legacy-wagon/ They should have been available domestically.
-
That’s why I included the second link.
-
Wow, I didn’t realize the exchange rate is 4:1!
-
You could always swap to the Laille Beatrush rear frame end bar: https://beatrushusa.com/products/beatrush-rear-frame-end-bar-2004-legacy-bp5-bl5?_pos=4&_sid=4d6049824&_ss=r https://www.blackhawkjapan.com/collections/beatrush/products/laile-beatrush-s86103pb-ra
-
You probably don’t want to know that the Prova mirror doesn’t perfectly fit the USDM rear view mirror (at least on mine). Also if you have the STi “carbon fiber” cover it will only fit the JDM mirror.
-
It's JDM so you'd have to store it or find a reason to get a show and display exemption, or a Canadian address.
-
What is this black border around the reverse light?
