Jump to content
LegacyGT.com

Aex1

Members
  • Posts

    112
  • Joined

Personal Information

  • Location
    Moscow (Russia)
  • Car
    Subaru Outback 2.5XT Limited 2005 5EAT

Aex1's Achievements

Enthusiast

Enthusiast (6/14)

  • First Post
  • Collaborator
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. I forgot to say that you'll see this valuable info at the low right corner of the already open EcuFlash. If you see something like this: "FT232R...", you are on the right way. Besides, there should be two new devices at the "Device Manager", something like this: USB Serial Port and USB Serial Converter. My EcuFlash 1.29a works perfectly with the last definitions. I only cleaned unnecessary papers, like "mitsubishi", etc. Also I removed all ROMs that are not directly related to my car, like "Forester Turbo", etc. Thus the program loads quicker. If you could read (download) your ROM, you definately can fash it with this cable. But first "Test Write ECU", then "Write".
  2. Just my 5 cents to this thread... If possible, always ask the seller what kind of chip is inside. We need only chips FT232RL or RQ. Others, like FT232BL, don't work on the preCAN Subarus. My cable, with FT232RL, works perfectly for logging-flashing. ONLY, of course, with EcuFlash 1.29a. After connecting the cable to the laptop, you'll see at the low right corner the info, but not complete. Like this, for instance: FT232R... In this case from the last letters it depends everything.
  3. Well, seems that you already sold that device, sduford. What a bad luck! But I'm almost sure that is OK for Auto Transmission, too.

    Regards,

    Andrey.

×
×
  • Create New...

Important Information

Terms of Use