Zack Kilgrave

This was the culprit right here. When I first tried to pull it, the cover of the relay came off. Finally pulling the relay itself showed discoloration near contact points. Pulled the Main Fan 2 relay right next door, and put that in and SUCCESS the brights were functional again. I feel silly for not having noticed that relay at first, or looking closer at discovering that the DRL used the same bulbs as the brights. Replaced that relay last night. Thanks to everyone in here who chimed in. Your assistance is most appreciated.

We have not tried this as we did not have information about what current the voltmeter should read. We will most likely check this on Wednesday. Thank you.

Thank you. I figured it might be in the engine bay box, but wasn't sure. I appreciate the electrical diagram also. Pulling the relays before was very trying as we don't have a puller tool, but we ordered one that should be here Monday. We'll probably test that on Wednesday.

We will definitely give this a look, thanks. Where in the car is this located? I in the engine fuse box?

I tried that tonight, the stick has no play in it.

I haven't checked the fuses with the voltmeter, but I'm not sure which setting to use, or what the results are supposed to be. (My husband is the one who knows how to use it, but he's asleep right now.) The dashboard indicator does illuminate.

As the DRLs worked fine I did not check them originally. All the fuses are okay, none blown.

Hello! I have tried searching through the various threads and have been unable to find anything similar to my issue. I drive a 2012 Legacy 2.5i Premium, no fog lights. My high-beams do not work. For a short while, I would activate them, and about half a second later, they would come on for about a second, and then turn back off. This is for both pull and push on the stalk. It was not one specific side, but both sides. I am unaware if a fuse has anything to do with it, but we have checked them and they are all fine. We (my husband and I) were able to locate the relays for both the regular lights and the high beams. Both relays function (we swapped them with the horn relay and both worked fine in that spot). Past that neither one of us is comfortable poking around without guidance, as we're used to working on older cars (96 Ford Escort for example) and we know that Japanese cars are build differently than domestic. We do have a voltmeter and I have several spare fuses. The DRLs do work, on their own setting, and on "auto," and I've read on here that the Legacy uses the high-beam bulbs at a lower power for the DRLs, and this seems to be the case. Any assistance in diagnosing the issue would be much appreciated. Thank you.