installed axle shaft today.
A note I would like to add for the New England guys if it hasn't been mentioned already. soak your bolts previously!
The balljoint pinch bolt sheared on me. drill swear repeat.
note :You can drill from the back side with a straight shot if you remove caliper.
In removing the balljoint I cracked the knuckle. DO not use a chisel to spread the knuckle or be very gentle. In all this horsing around the balljoint with 114k failed. Long story short, 1 balljoint, 1 knuckle, 1 end link that was also frozen later its back together. Be methodical and work slow, stuff breaks if not. hope this helps someone to avoid my situation.