Yeah for sure.
I made the mistake on the first one by not cutting a spot for the end of the led tube to go and had to do it after I already painted it. Make sure you cut a section out in the middle just to the right of the projector housing, but also on the top corner because the led tube is about 1-2cm to long.
http://tapatalk.imageshack.com/v2/15/02/01/e4134508342a049c651624d7a8fbcfae.jpg
I also went to fast and did too long of sections super gluing the tube down on the first one, my advise is to go slow and glue 2-3" sections at a time, use clamps (I used bad clips) to hold down the corners as they like to lift up.
http://tapatalk.imageshack.com/v2/15/02/01/a265987583b751fac03e200bbc2c274d.jpg
The last thing is I used electrical tape to cover up the bottom of the led tube as the super glue seeps out and looks crappy. I'm not sure how long this will hold up so I'll keep you guys posted.
http://tapatalk.imageshack.com/v2/15/02/01/53012af55cfc754a8d18409102d8900d.jpg
Sent from my iPhone using Tapatalk