Infosecdad

https://parts.subaru.com/a/Subaru_2005_Legacy-25L-TURBO-5MT-GT-LIMITEDOBKXT-WAGON/_54102_6030712/WATER-PIPE-1/B13-036-02.html 14472AA040

Someone updated the Wikipedia article on April 11 to mention an internal email stating that 2025MY will be the last for the Legacy. https://en.wikipedia.org/wiki/Subaru_Legacy

I have a set of stock injectors, but they are the side-feed style from 05-06, you need the top-feed style. There should be folks on here with spare stock top-feed injectors.

Those are plates needed to attach the end links for the rear swaybar if you are running JDM aluminum trailing arms. USDM has a built-in mount point.

You would need to convert the .heic to .jpg. Apple has a great format that can basically store mini videos, but it's not a good format for viewing on the web.

I mean, there is a reason why I don't have one... hahaha I'll probably fab up something similar with the welder this summer if I get a break from work and feel like welding in 90-degree weather.

I need one of those some day...

You just have to cut the corners of the front crash bar to fit a pre-facelift JDM bumper. I have a post from ~2019 with a picture of how much in the "what did you do to your 4th gen" that I'll try to find.

Yes, if you are super careful you can get close to what it was (sharpie on the bolts); but I wouldn't drive a long time without getting a proper alignment.

Did you see these? https://get-primitive.com/product/struts-shocks/kyb-struts-and-shocks/kyb-excel-ggr-2-2000-2004-legacy/ https://www.summitracing.com/search/brand/kyb-shocks-struts/part-type/shocks-and-struts/year/2001/make/subaru/model/legacy There is a front set on Amazon: https://www.amazon.com/KYB-334273-Excel-G-Gas-Strut/dp/B000C40RWK https://www.amazon.com/KYB-334274-Excel-G-Gas-Strut/dp/B000C3ZCLW Rears on Amazon: https://www.amazon.com/KYB-341275-Excel-G-Gas-Strut/dp/B000C40S42/ Hopefully that helps.

Do you still need anything on this list?

Where are you located? Those look like headlight washer/sprayers.

Good catch, onward! When I got all "f" it was the connection on the clamp, I would try a few ever so slightly different positions, it's not easy sometimes to get it just perfectly aligned to touch all the pins.

Have you tested to see if the clamp is maybe 180 degrees off? Maybe it just needs to be flipped. Or you might need to slow it down a little more, things are even faster than when I first did it. Sorry, hard to troubleshoot from over here...

Have you tried reseating the clamp on the eeprom? Sometimes that does it.