Infosecdad
-
Posts
2,350 -
Joined
-
Last visited
-
Days Won
17
12 Followers
Infosecdad's Achievements
-
https://parts.subaru.com/a/Subaru_2005_Legacy-25L-TURBO-5MT-GT-LIMITEDOBKXT-WAGON/_54102_6024591/FLYWHEEL/B13-011-01.html It's the "Cover Complete Clutch Housing" on that diagram.
-
"And I even like the color..."
-
Tide is the admin, he's the only person that can help answer your questions as far as I know.
-
Any chance you got logged out on the mobile browser? If you are still logged in, then it might be related to a status change on your account. I don't know of any event that happened, that's beyond the realm of moderators.
-
I may have one in my part out: -
Most likely. You might be able to inspect and reuse the bump stop and dust cover, but I would plan to replace the mounts. They have seen a quarter of a million miles, this would likely be the only time you would have to do this and they are tired.
-
Fairly certain that after 30+ years you're going to have to find a transmission, not sure you could have found that part 10-15 years ago even. Not sure where you are, but I have a rebuilt Phase 1 4EAT w/ 60k miles on it chilling in my garage.
-
My spare set of Cusco brackets are 4.8mm. I would keep an eye on the 2mm; it might be fine, but there might be a good reason the others are near 5mm thick.
-
https://parts.subaru.com/a/Subaru_2005_Legacy-25L-TURBO-5MT-GT-LIMITEDOBKXT-WAGON/_54102_6030712/WATER-PIPE-1/B13-036-02.html 14472AA040
-
2025 MY - NO MORE LEGACY
Infosecdad replied to 0SuperDuper0's topic in Seventh Generation Legacy (2020 - )
Someone updated the Wikipedia article on April 11 to mention an internal email stating that 2025MY will be the last for the Legacy. https://en.wikipedia.org/wiki/Subaru_Legacy -
Subaru Legacy GT 2007 Fuel injectors
Infosecdad replied to Deltaking's topic in Legacy Photos (2005-2009)
I have a set of stock injectors, but they are the side-feed style from 05-06, you need the top-feed style. There should be folks on here with spare stock top-feed injectors. -
Those are plates needed to attach the end links for the rear swaybar if you are running JDM aluminum trailing arms. USDM has a built-in mount point.
-
06 LGT Factory LED?
Infosecdad replied to 09anderson's topic in Fourth Generation Legacy (2005 - 2009)
You would need to convert the .heic to .jpg. Apple has a great format that can basically store mini videos, but it's not a good format for viewing on the web. -
I mean, there is a reason why I don't have one... hahaha I'll probably fab up something similar with the welder this summer if I get a break from work and feel like welding in 90-degree weather.
-
I need one of those some day...
