Jump to content
LegacyGT.com

GoonersBlueWagon

Members
  • Posts

    4
  • Joined

About GoonersBlueWagon

  • Birthday January 27

Personal Information

  • Car
    2006 Subaru Outback Limited

GoonersBlueWagon's Achievements

Rookie

Rookie (2/14)

  • First Post
  • Week One Done
  • One Month Later
  • One Year In
  • Conversation Starter

Recent Badges

0

Reputation

  1. Worth it to have this the toolkit. I use the chisels to work in between the knuckle and the Hub mounting flange. If you look at the knuckle there is space in between the dust shield and knuckle to get the chisels in and wedge the hub out from the knuckle. I Did it wrong and went between the hub mounting flange and the dust shield. I damaged the shield a little but i was also have to get a crowbar in there to pry the hub off the rest of the way.
  2. Do you still have one rim left?

    http://legacygt.com/forums/showthread.php?t=130080&highlight=Rim

     

    how much is shipping to 21704?

  3. Works as originally posted with the install modification of Placing the lead from the diode under the strip connector for the bulb. No more dark front cabin is all I care about and it was easy to do! I also did not splice the wire for the map lights I wound up taking the "E" cover off of the connector instead and used a mini flat head screwdriver to unlock the pins. I swapped locations for the pins and all done. No solder in cabin soldering.
×
×
  • Create New...

Important Information

Terms of Use