So I adjusted the springs again yesterday, but here's the weird part. The springs were preloaded pretty high, I didn't take a measurement on how how it was but it was much more that the β
preload I previously set when FA told me to. I reset them to β
compression, and that allowed the springs to rotate, but today's drive felt very similar; bouncy on small road imperfections like a pogo stick, and a hard launch on bigger bumps
I have the 7th gen FA, with the Allen screw to lock the spring, the only thing I could think of is that the screw wasn't tight enough and the spring rotated, but wouldn't it drop to a lower preload not a higher?