Jump to content
LegacyGT.com

subs and amp that i'll most likely get


team23jordan

Recommended Posts

2 JL W6 10" 1 JL 1000/1 amp do you guys think that'll be too much bass?? should i get just one W6 10" with smaller amp???

Perrin BIG maf intake

Perrin Turbo Inlet

HKS SSQV BOV

Megan Racing header with UP (ceramic coated)

HKS DP (WRX)

DMH E-cutout

Custom 3" catback

UTEC

Link to comment
Share on other sites

Bass, man I like to keep my hearing at least until they perfect and make the replacement ears priceworthy. :D Personally, I'm fine with not a whole lot more than the stock unit they had been putting under the seats. I thought someone actually made an aftermarket unit that could fit in the same spot. Maybe an Infinity Basslink or similar is more feasible. I'd rather keep my trunk space for bags though.
Link to comment
Share on other sites

Depends what you want. I've had 2 Kicker Solobaric 10" and 4 JL 8W6's in my old Prelude. Both were good, but paled in comparison to a single 10W1 in a friends pickup. I can say that if installed right, one 10" is plenty and your looking at a little overkill on the amp IMO. Sedans are harder to set up properly because the trunk can act like a secondary box if the front waves of the subs going into the cabin aren't separated from the rest of the trunk. This was my problem. Personally, I wouldn't want to add that much weight to a car just for subs. Would you really want to put that much weight into the trunk? The bigger the amp, the more weight. If you don't think that 1 10" is enough, look at a single 12". For a sedan, I would like to do a single IDQ10 or 12 through the rear deck using aperiodic membrane (mesh and fiberglass insulation). This would be the lightest way since the trunk is the box. You would just have to seal up the trunk (no ski pass through if that's "standard"). to keep the back waves from interfering. Wagon would be easy. Build a fiberglass encloser that fits on top of the spare tire, and there is enough room to get a 12" sub I'm sure. Easy as that.
Link to comment
Share on other sites

i dont know i was thinking abou getting 12" W7 but getting 2 10" W6 is cheaper or about the same $$$ as 1 12" W7 and say i get 2 W6s should i get a JL 1000/1 amp or get some 2 channel amp??

Perrin BIG maf intake

Perrin Turbo Inlet

HKS SSQV BOV

Megan Racing header with UP (ceramic coated)

HKS DP (WRX)

DMH E-cutout

Custom 3" catback

UTEC

Link to comment
Share on other sites

What about a single 12W6v2 or 12W6AE? It sounds like you have this imaginary money burning a hole in your pocket and just want to spend $XXXX regardless of what it is. If you look at JL's power chart, using the 1000/1 amp would clearly void the warrantee when 250-300 watts per sub is shown to be in the optimum range. So use a 500/1 with 2 subs or a 250/1 for a single. The 250/1 amp would probably be 1/3 the weight of the 1000/1. But if you want heavy subs like the W6v2, I doubt that weight is a concern. If your intent in getting the two 10's then do it, but at least don't overpower them.
Link to comment
Share on other sites

[quote]using the 1000/1 amp would clearly void the warrantee when 250-300 watts per sub is shown to be in the optimum range. So use a 500/1 with 2 subs or a 250/1 for a single.[/quote] i talk to this local stereo shop guy and he said amp shouldn't be short on watts 2 W610"s put 600 and 500/1 will be 100 watts short and he said that's bad for the subs or whatever and i was giving him :| face and he was trying to convince me by telling me how many years he's been working on stereo system blah blah blah by the way i'm not gonna over power it at all most i'll play upto 80% max..it'll be better if what you said works out cause i dont wanna spend $900 on amp any other subs that sounds good that yall know??

Perrin BIG maf intake

Perrin Turbo Inlet

HKS SSQV BOV

Megan Racing header with UP (ceramic coated)

HKS DP (WRX)

DMH E-cutout

Custom 3" catback

UTEC

Link to comment
Share on other sites

The guy is full o crap, but he's just doing his job. Underpowered can be bad, but there is an optimum RANGE. Even if you're on the low end of the acceptable range, you're fine. I'd hate to be in the car audio business now that so many buy in online. It's gotta be hard to make a buck. The ultimate that I hear about is the Image Dynamics IDMAX. I haven't checked on the price, but it's not going to be cheap. Probably similar to a 12W7 and as heavy as one as well. [url]www.imagedynamicsusa.com[/url] I hear plenty of good things about the IDQ series, and the weight is much less (important to me).
Link to comment
Share on other sites

^never heard about them but cool subs [img]http://www.imagedynamicsusa.com/website/products/idq_files/image004.jpg[/img] but i dont know if i wanna get that brand cause i never heard of'em i changed my mind cause of you :) now kinda interested at W712 and one W610 one of my friend has W7 12 but the box basically fills up his whole trunk and he drive cherokee...and he got his ear infected or something cause of bass so i'll be checking out W6 10" with either 250/1 or 500/1 W6 has 400 watts and i think 250 watt amp is too weak for it...

Perrin BIG maf intake

Perrin Turbo Inlet

HKS SSQV BOV

Megan Racing header with UP (ceramic coated)

HKS DP (WRX)

DMH E-cutout

Custom 3" catback

UTEC

Link to comment
Share on other sites

Really? Never heard of them? Back in the day, Image Dynamics and USD (from SpeakerWorks) were two of the major brands in serious competition probably because they were really innovators with the horn speakers, but also their subs. What I like on the IDQ10 & 12 is the lower weight magnet but still great SQ, the tiny enclosures, and the low power needs. Nowhere else will you find a 12" that only takes. 0.6 cu. ft. OTOH, it isn't as efficient as the JL's. But, you can fit two IDQ10's in the space of one 10W6v2 for the same weight and give you +3db boost. If you are looking at a W7, I would really say you should look around for reviews or opinions on W7 vs. IDMAX. Since this interests me as well, I thought I'd check out prices. 10W7 $333 (lowest NEW ebay price) 12W7 $475 (lowest NEW ebay price) IDQ10 $147 [url]www.mmxpress.com[/url] 2x$110 ebay IDQ12 $160 [url]www.mmexpress.com[/url] IDMAX 10" $255 (lowest NEW ebay price) IMAX 12" $288 (lowest NEW ebay price) $125 used! Now that it looks that the IDMAX 10" is out, that would be a sweet deal, and it would do just fine w/ a 500.1. Personally, I would maybe be swayed by a IDQ12 w/ 250.1
Link to comment
Share on other sites

ebay... my friend bought brand new JL 10 W6 (older version) and he opened the box and had :lol: face cause he was happy he got it for 80 bucks then he was just checking out and stuff and when he installed it his face was :x :evil: cause it was a fake JL so i dont know if i trust ebay speakers

Perrin BIG maf intake

Perrin Turbo Inlet

HKS SSQV BOV

Megan Racing header with UP (ceramic coated)

HKS DP (WRX)

DMH E-cutout

Custom 3" catback

UTEC

Link to comment
Share on other sites

Buying it for an unreasonably low price of $80 would be the first clue. There are ebay stores that have built up good reputations that would be worth using. Being able to buy some equipment used on there really makes equipment affordable whether it's JL, ID, Diamond, or whatever.
Link to comment
Share on other sites

  • 2 weeks later...
one of my friend has 2 infinity 12"s it sounds really good and he got it for damn cheap and it's a lot cheaper than W7 or W6 but W7 sounds a lot betta

Perrin BIG maf intake

Perrin Turbo Inlet

HKS SSQV BOV

Megan Racing header with UP (ceramic coated)

HKS DP (WRX)

DMH E-cutout

Custom 3" catback

UTEC

Link to comment
Share on other sites

  • 2 months later...
There are a good amount of subs that are better than a W7 and cost less. Those Image Dynamics ID10's are good. A friend of mine has three of those in his SUV and they are loud and sound awesome. Also, it never hurts to get too powerful of an amp. You can turn down the gain to get the amount of power you want, with less distortion. :D
Link to comment
Share on other sites

[quote name='Th3Franz']There are a good amount of subs that are better than a W7 and cost less. Those Image Dynamics ID10's are good. A friend of mine has three of those in his SUV and they are loud and sound awesome. Also, it never hurts to get too powerful of an amp. You can turn down the gain to get the amount of power you want, with less distortion. :D[/quote] ID's rock for price/performance ratio. As long as you aren't looking to break your neighbors windows when you roll into the hood that is. :D
Link to comment
Share on other sites

[quote name='ha-evolution'][quote name='Th3Franz']There are a good amount of subs that are better than a W7 and cost less. Those Image Dynamics ID10's are good. A friend of mine has three of those in his SUV and they are loud and sound awesome. Also, it never hurts to get too powerful of an amp. You can turn down the gain to get the amount of power you want, with less distortion. :D[/quote] ID's rock for price/performance ratio. As long as you aren't looking to break your neighbors windows when you roll into the hood that is. :D[/quote] You'd be surprised at how loud they get, and they don't seem to mind taking more power than they're rated. He's hitting 149 dB outlaw, the last time he got metered. It's crazy to get that loud from 3 10" subs. :D Then again, these are just ID's not IDQ's.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

Terms of Use