|
|
|
IPD Swaybars (22mm FSB and 19mm RSB)
|
|
|
|
Reviews
|
Views
|
Date of last review
|
|
4
|
6926
|
|
|
 |
|
Recommended By
|
Average Price
|
Average Rating
|
|
100% of reviewers
|
None indicated
|
9.0
|
|
|
|
|
|
|
|
Description:
|
This kit utlizes the stock endlinks, therefore it is only recommended for vehicles of stock ride height. If your vehicle is not stock ride height, we recommend that you look into aftermarket endlinks such as the AVO endlinks.
|
|
Keywords:
|
IPD Rallitek FSB RSB 22mm 19mm front rear swaybar
|
|
|
|
|
Author
|
|
rew92
New Member
Registered: December 2010
Location: Connecticut
Posts: 6
|
|
Review Date:
|
Would you recommend the product? Yes |
Price you paid?: Not Indicated
| Rating: 9
|
|
Pros:
|
reduced body roll, increased turn-in
|
|
Cons:
|
easier to lose control in snow (expected)
|
|
Worth every penny. So much flatter in corners and noticeable improvement in turn-in. I broke a front stock endlink within a couple weeks, so install them with aftermarket ones (i got the Rallitek ones to match) or plan on replacing them soon. Great product.
|
|
|
|
lakepop
New Member
Registered: February 2007
Posts: 10
|
|
Review Date:
|
Would you recommend the product? Yes |
Price you paid?: Not Indicated
| Rating: 9
|
|
Pros:
|
19mm RSB...fit my 07 Outback Ltd
|
|
Cons:
|
minor quality control issue..pax side mounting hole was restricted so as to NOT allow the bolt to fit thru.
|
|
Considering the low cost and relative ease of installation , I consider this to be a great mod! The mounting hole restriction was resolved with a reamer......a nuisance more than a major issue......still 
|
|
|
|
|
BlackHole
Mad Scientist
Registered: March 2007
Location: Plainfield, IL
Posts: 1038
|
|
Review Date:
|
Would you recommend the product? Yes |
Price you paid?: Not Indicated
| Rating: 9
|
|
Pros:
|
19mm RSB only; much more neutral handling for 05 LGT; great value
|
|
Cons:
|
bar ends needed to be drilled to fit stock endlinks
|
|
Handling is greatly improved, a lot more neutral with the 19mm RSB + stock FSB. Corners much better with no discernable impact on daily driving or NVH. Very inexpensive - a great value for under $100 (on sale). Easy install, but as lakepop noted the bar ends needed to be just slightly enlarged to fit the stock endlinks - a standard hand drill + bit did the trick.
|
|
|
|
|
Ferenczy33
Senior Member
Registered: January 2007
Location: Sacramento, CA
Posts: 259
|
|
Review Date:
|
Would you recommend the product? Yes |
Price you paid?: Not Indicated
| Rating: 9
|
|
Pros:
|
Great Deal, Excellent Fitment
|
|
Cons:
|
None so far
|
|
Figured I would throw in my review after just installing my f/r sway bars just a couple of days ago. Obviously IPD has taken care of the fitment issues the previous reviewers had mentioned with the stock endlinks as the fitment on my set was absolutely perfect. Had both bars installed in just about 2 hours. Body roll significantly reduced and steering input is a little tighter. Much more stable ride. Now just waiting on my backordered AVO RSB mounts before I can really throw it into a hard corner and see what it does. So far though, great mod for the money.
|
|
|
|
|
|
|
|
|
Statistics
|
| Users |
61,855 |
| Products |
349 |
| Reviews |
900 |
| Views |
1,372,137 |
|
Random Products - Swaybars and Endlinks
|
Front and Rear Adjustable Sway Bars - 22mm
mickeyd2005
|
Swaybar Endlinks
mickeyd2005
|
|
;)
;)
;)
;)
