AZP Installs

**subiedad51** · #1: 06-28-2012, 07:20 PM

Just picked up my 07 LGT from AZP Installs. My car was in primarily for a clutch install. After 120k miles my stock clutch was making for a not so great ride

Once again I leave a very satisfied customer

They did the clutch, resurfaced my FW, adjusted my E-brake and did a compression test. As usual their service was top notch, the car was done when promised and no extra bs charges or services that you don't need. I highly recommend AZP for anything from minor maintenance to a major job. They've maintained my car since day 1 and will continue to be the only ones to work on it. Their passion for subies is what makes their service so good.

And btw, I wish I had done the clutch about 20k miles ago. What a night and day difference. Can't wait until it's broken in.

**rockle3** · #2: 06-30-2012, 08:57 AM

AZP is great

**robinlsb** · #3: 06-30-2012, 09:07 AM

AZP is one of the best

**jasejase** · #4: 06-30-2012, 09:16 AM

^^ all of this is true! they did my (and my buddie's) stage 3 build outs. Great job.

**gr4v3r** · #5: 06-30-2012, 07:09 PM

azp is great they do all my work

**AZP Installs** · #6: 07-01-2012, 12:15 PM

Thanks guys. We are just a bunch of honest enthusiasts who love to share the subie love!

-mike

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.
Call directly as We carry almost every manufacturer now, so before you buy parts call us.
AIM: AZP Installs | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.2971 | T-1 Certified Amsoil Direct Jobber
"Race Tested, Enthusiast Approved!"

**MadMontie1** · #7: 07-02-2012, 07:22 PM

I think I better be showing up this fall, 99k miles now, just about time for the timing belt, and I had my state inspection done today and they told me my brakes are getting ready to be done, looks like a nice big day! Probably schedule it around my next oil change around 102k

**froggert** · #8: 07-03-2012, 08:09 AM

any idea if they have scales for corner balancing yet?

**jasejase** · #9: 07-03-2012, 10:42 AM

Im sure Mike will chime in on that one...

**AZP Installs** · #**10:** 07-03-2012, 10:44 AM

Quote:

Originally Posted by froggert

any idea if they have scales for corner balancing yet?

Not yet.

we had to reallocate funds we were going to spend on them...

-mike

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.
Call directly as We carry almost every manufacturer now, so before you buy parts call us.
AIM: AZP Installs | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.2971 | T-1 Certified Amsoil Direct Jobber
"Race Tested, Enthusiast Approved!"

**jasejase** · #**11:** 07-03-2012, 11:09 AM

But you guys have that sweet smoke testing machine. Very nice tool! Left jersey feeling very confident post build.

Still going strong at 347 whp.

**RJS5689** · #**12:** 07-03-2012, 12:25 PM

I'll jump in with the AZP praise. These guys do great work. I don't like to drop names, so I'll just say a reputable, independent Subaru specialist could not get my Perrin LCA bushings out of my car. They claimed they were seized in and they would risk snapping my control arm if they tried removing them. AZP was able to get them out without any hassles and had my new poly bushings installed in no time.

**froggert** · #**13:** 07-03-2012, 02:15 PM

Quote:

Originally Posted by AZP Installs

Not yet.

we had to reallocate funds we were going to spend on them...

that's too bad.

**westu37** · #**14:** 07-06-2012, 01:28 PM

got to show some love too.
Talked to Adam and got the whiteline LCR bushings. Installed them on the 4th and am enjoying them now. Very informative and helpful guys.

Wes

**m sprank** · #**15:** 07-12-2012, 03:47 PM

Bump for AZP.