I am trying to determine the best configuration for SQ based on the components I currently own. Should I run the rear speakers off the factory h/u, or add those to the components I will be installing in the front to present a 2ohm stereo load? I want to leave channels 3 and 4 for the sub later this year ~280w.
I also plan to use a metra connector in the front doors to send the signal to the Cleensweep from the factory wire, so I am running 3 pairs of 16ga to each door. From reading other threads, it sounds like the front and rears are sent the same signal from the h/u, so I won't need to tap that as well for the CS.
Also, I have 100sqft of the eDead v2 stuff coming. 75sqft of which will be applied to the front doors (2 layers on inner, 1 layer on outer skin), along with custom-made 1" plexi spacers and ABS inserts for the door openings (per Manville).
- Hifonics Zeus ZX6400
85x4 @ 4ohms stereo, 170x4 @ 2ohms stereo
(and yes I know their numbers are ambitious)
- Quart PVF-216 6.5" components to be coaxial mounted in the doors (per Manville)
- Stock rears for now
- Sub (either ED SQ10, Quart 10", or 10W6v2) to come later in custom fiberglass box
Am I missing anything here?