BL/BP Legacy GT Meaty Tire Thread

I understand that its hard to fit some aggressive fitment under the fenders of LGTs. Lets post up some fitment specs of people that have pushed the limits. I know there is a "stance" thread which I love but this is different. I am considering going a little more aggressive with my wheel and tire setup.

I have 18x8 +35 BBS CK 235/40/18 Conti DWs

I'm looking at 18x9 +45ish with a 245 or 255



My old car I had Work Emotion XD9 18x10 +18 with 225/35/18



I later switch to Enkei RPF1 18x9.5 +15 with 265/35/18

255/35 on 18x9.5

I down sized to a 235/40 but I'm considering stepping back up to a 255/265.

BNGUYENBB6: do you have a side profile? how much camber and fender rolling did you do? offset of the wheels?

I unfortunately do not have a side profile pic. I don't have rear arms so the camber was sitting where it wanted after lowering(about -1.8*). All my fenders are rolled flat with a slight pull. I had to roll/bang the area of the fender directly back of the rear door to stop the tires from rubbing hard.

Edit: Wheels are +35

245/40 on 17x10 +20 offset I wanted to go with 255 but money was real tight.

Originally Posted by Arielgt93

245/40 on 17x10 +20 offset I wanted to go with 255 but money was real tight.

Could i get some info on those flares, they looks delicious.

I ran 18x9.5 +38 rpf1 with 255/35/18. Rolled/pulled fenders

Originally Posted by bnguyenbb6

255/35 on 18x9.5

I down sized to a 235/40 but I'm considering stepping back up to a 255/265.

Looks sweet, what exhaust are you running if you don't mind me asking?

I'm running 255's but i'm also an outback. 17x8et35 with 255/50R17's

Leggomyleggy- Its a custom VTSI Fab Exhaust with Vibrant resonators

Let's get more members in here. I have seen a few with meaty setup over in the aftermarket wheel thread.

Sent from my Nexus 5 using Tapatalk

Sub. this thread haha

17x8.25 ET35 with 235/45/17

Fenders are rolled and pulled. Max factory camber. Lowered on KW V2's. Rubs on rear when hitting good bumps. Really wanted to do 245/40's, but knew it would be even tougher to fit :-(

Sent from my SCH-I535 using Tapatalk

265/35/19...

I had 17x9 +38 with 245/40/17