Originally Posted by Andrew25gt
Just picked a set of these up from Rally Sport Direct. Wont be able to install till next week but excited to see others results with them.
I got mine installed today. Very straightforward. Everything fit nicely. The only minor thing I noticed was that the fronts don't have the hashmarks around the camber bolt, so just pay extra attention or snap a pic of it's position before you screw it off.
The only modification I made during installation was to add a 3/8" thick bit of rubber padding to all the top mounts. Hopefully that cuts some of the NVH versus hard mounting.
I'm not sure why but I'm getting about 29/30 "clicks" between the softest and hardest setting. All the info I see online says there should be 16. I set everything to 15 clicks and did a quick loop around block. Initial impressions were good. The springs are definitely stiffer than what I'm used to. No clunks or odd noises. I softened the fronts by 5 clicks and I'll see how they feel on my commute tomorrow.
I initially set everything to the stock ride height, that's why it looks like the springs are so high in the photos.