Jack up the car, remove the wheel well liners
Remove the dust caps, and old bulbs
Drill a 7/8 hole into the dust cap(you may need to notch it to clear the plug to the ballast.
Install the new bulbs and dust cover. This may take some time so be patient.
Find a place for your ballasts
Run the power relay under the trim in front of radiator. I used zip ties to hold them at the four holes where clips didnt go.
I mounted the relay in front of the battery
Run all your grounds and plug up the ballasts to the relay. You will leave the passenger side unplugged and use the wire from the relay
If all went well yours will work
Sent from my HTCONE using Tapatalk